Search:

Doug,

Did you get the manuals? If not, I can mail them to you on monday.

N

Sent from my SM-T825 using Tapatalk

Hi Andy,

We often machine composites, we also manufacture them. The tools you will need are expensive, and you need one kind to drill a hole and another kind to trim out a panel. Check out these...

Hi Bart,

I've got english manuals that were given to me by cncmm. If you are still looking for them pm me with your email add and I'll send them to you.

Folks,

Ok, the news is that I've unmounted the spindle cartridge from the DMC103v. Its a very simple operation if done right. Now we'll get a fully refurbished spindle with new bearings, springs,...

#G59

Thanks a lot for the suggestion. Actually, I incorrectly said that I'll disassemble the cartridge, while I wanted to say: I'll unmount the cartridge, keeping the cartridge integral. Thanks...

Hi Folks,

As you may know from my previous posts, I've purchased a used DMC 103v, now using it for some time, its spindle has started giving a grinding sound and it appears that some maintenance...

Hi Folks,

I've just been informed that DMG MORI, support will not answer any calls on machines made by them if the customers don't have a "hot-line" contract :mad:

I've got a 1999 DMC103v and...

Bump!!! Any suggestions?

Hi Folks,

I've got a terrible terrible problem. My DMC103v from the year 1999 is totally frozen. Let me explain the sequence of events that brought it to this stage.

On Monday the machine was...

Aaah, should have waited a bit before shooting this one off. I've fixed the issue. cmcmm had sent me a trouble shooting manual in german, google helped me translate it and I followed the procedure to...

Hi Folks,

I managed to get the machine working, thanks to the help from cncmm but now I have a serious issue. Today, I came in and started the machine, with very low pressure (4bar instead of...

I've got sprutcam, with a standard post of 810d, beyond that I'll be modifying it to the specific nuances of the dmg m codes. I'm thinking of video logging my learning experience with the machine for...

Forgot to respond to your question, yes I've got the electrical manual, but it's in German. I can make a pdf of it if you need it.

Hi cncmm,

Thanks a lot for the response. I was on vacation and just got back. I'll truly appreciate the manuals.

The machine is now installed in our facility. The manuals I have are in...

Hi hadi2217, I can tell you the parameters that you can use to set this in my syntec control, just that it's not ez3. If you'd like that, I'll look into it on Monday.
N

Hi Folks,

I've just bought an year 2000, DMC 103V with Siemens 810D in an auction. Its still not here and I've got to get some technician to block the machine for transport, unplug the machine,...

Michael, try one thing first, can you try to mount \\MICHAEL\ SUPRRMILL as a remote disk on any other computer connected to your network?

Michael,
I can help you setup your syntec with a network connection. Send me a pm. I use our machine exclusively from our servers.
Nash

Super motor, the issue was with excessive cutting speeds with too large depth of cut. For the last 4 years, almost everything has worked well. I would suggest to reduce your feeds by .25 get them ...

Dear Priestwood, the Format looks REALLY slick... I'm curious about how much will it eventually cost. I would agree with the Z axis that they make, its not the issue with their machine, as far as I...

Hi Mike,

I use Alibre Design Expert. For 2.5D work, you're well set. The machine will allow you to do full 3d machining, where the Alibre Expert's tool paths are not going to help you.

I...

Hi Priestwood, Mano,

I thought that the syntec controller 940M doesn't have a limitation to not do horizontal drilling. It can easily run 5 axis. What sort of horizontal drilling are you...

Hi Norbert,

I'm still waiting for some materials to finish the shoe. Its going to be in epoxy fiberglass, it will allow the sucking up of dust from the source. I'm also building a small vortex...

Just to let you know...

Checked all the relays on a multimeter,
Checked all the wiring
Checked all the switches and proximity switches...
Put locktite on all the proximity tabs to prevent them...

Looked at the machine issue again today and have come to the conclusion that perhaps a relay in the system is gone. It will be great if someone who has a syntec controller could verify my...

Hello All,

As you may know I've purchased a Jinan QuickCNC machine with the following dimensions, 1500x4000x400 with a Syntec Controller. The machine was idle till very recently (all kinds of...

Friends,

I'm currently doing a lot of dry-runs with real code on my JinanQuickCNC with a Syntec controller.

I'd like to understand whats the highest combination of cutting speeds...

Nope, I'm not making a long board but the object is similar in dimensions and gentleness of curves. The material density is 250kg/cubicm. The machining will be 3 axis, so not loading on the 4th axis....

Thanks for your inputs. I've downloaded a copy of MadCAM and am trying it with my Rhino installation. My part is a large foam model

1. The part is X=1000mm Y=3000mm and Z=190mm
2. I'm using...

PS, this is a cross posting in OneCNC, MadCAM and VisualMill threads here.

Hi there,

Our setup is as follows:
Rhino 4 and currently 5wip for all surface modeling
Alibre expert for all solid...