the pitch dia. tolerance from the Handbook and on our drawing is 3.886 - 3.879. I am measuring using the 3 wire method, with 3 .072 wires, my measurement is 4.003 over wires, the...
Type: Posts; User: Jedi
the pitch dia. tolerance from the Handbook and on our drawing is 3.886 - 3.879. I am measuring using the 3 wire method, with 3 .072 wires, my measurement is 4.003 over wires, the...
Ive had no complaints with our Toyoda Horizontal with a cat 50, it's a beauty. The problem im having is, all of a sudden AL-42 as " position coder 1-rotation signal not detected", came on and the...
Im am on a tm1p fully enclosed. I am trying to open the tool carousel door. On a fadal it is possible and makes tool loading easier. Is it possible on this haas?
Not saying a fadal is better! :bs:
Thanks cadman, Somehow i changed an option in workgroups, workgroup info, from part geometry to part stock. not exactly sure what it does but changing it back to part geometry helped. I really need...
Been using mastercam for 6 years and gibbs for one week now. :).
I have my part drawn on Z0.0 my material is on Z.01 - Z-1.0. My backplot red line toolpath shows corect positioning, but when i...
N1
( 0.031 RAD. 80-DEG. INSERT )
G50 S1800
G00 T101
G97 S400 M03 (****problem have to push start here****)
G00 X2.6 Z0.075 ( X* Z*)
G96 S900
( FACE )
G00 X2.6 ( X* )
WHENEVER IT GETS TO THIS PART IN TH PROGRAM IT STOPS AND WAIS FOR ME TO PUSH START AGAIN ??? ANY IDEAS PLEASE.
I have a 4.5 dia tubing and i need to put a couple of numbers .5"
around the cylinder. How do i create letters on an arc with out doing it in solids. We only have 3 axis, and we are using a small...
which number displays that it is on 1?
How do i modify the 9000's in the parameters. The program is locked so i cannot make any edits. I have a macro stored in there that i want to modify. Thanks in advance. Does anyone know of a good...
Im trying to learn gibbs, can anyone direct me to either a good book or online course. Thanks
i know how to change it in the operations manager but i hate having to remember to change it in every one so im wondering if there is a way to keep it at 2 (g54). thanks
when i pull up a tool is there a way so the height and dia. offset follow the tool number offsett or do i have to manually change it.
how do i keep the g54 as a default so i dont have to manually...
Do you quote jobs by the hour or do you quote how much per part?
It says on the transformer 4-0 VA so im not sure. Im looking for one that has these options.
I need a control power transformer can anyone give me any help on if oter types will work because i cant find any that have the different outputs 12v and 110v. the old one is 1 PH 50-60HZ ...
Im using a high positive stainless insert. If i use the steady rest will it push the work off centre because i still have to turn the piece around and machine the other side?
Im having a hard time turning the OD of a 35" length stainless steel bar 2.5" in diameter. Ive adjusted the speeds from 300-1200 as well as slow feeds and fast feeds. Ive found that a slow speed of...
On a fadal 4020 and 2216 the command is TC,1 to open the tool changer
sorry those are the parameters for a Dianichi F20 with a 0T controller
I had to manually input some of the paameters' i think it was the 9000`s. This was to set the parameters for sending and recieving so i could send the rest of them via rs232.
Ps these were for...
its a fanuc 0T 15f and i do have the parameters at homes sinse i erased them once by accident let me know if tey will do.
Haha thanks. Ill try it monday and by the way Mike the mastercam training videos were great im definately in for a raise.
I converted a solidworks file, iges to mastercam and i cant toolpath off of solids. How do i convert it or put it into a recognizable solid so i can machine off of faces and edges? im using mastercam...
we have a 2216 and we have the same problem. Sometimes it wont start when i push the green button but after i turn the main power on and off a couple of times it usually works? Does yours start...
EX. when i open the system configuration dialogue box it is way too long and there are no arrows that appear at the edges to resize it. I just installed it. Also the z postion in the bottom left...
It was a silly mistake because i adjusted my parameters so my g30 z0.0 was where my zero was in the program but i adjusted my workshift a couple of thou and when it would return to g30 it would show...
Im running a 6 axis Hanhwa screw machine and the upc battery died completely. The zero return alarms are apearing. In the manuals it doesnt show how to zero return and theres no zero return when you...
Thanks for the reply. There was a small twist in the parallelism between the tailstock spindle and the bar that holds the limit switch dogs. I loosened the clamp that holds both of these together and...
My tailstock on our dainichi lathe wont advance it will reverse though. The microswitch is workng fine but when i push advance i can hear the hydraulics pressure changeing directions but it wont go...