two solutions to your prob no math required.
start point and end point if given use G1.
if not find a single point, write your program in a straight line on X or Y then use G51.1 and rotate to the...
Type: Posts; User: Valimarsbro
two solutions to your prob no math required.
start point and end point if given use G1.
if not find a single point, write your program in a straight line on X or Y then use G51.1 and rotate to the...
I'm running an SKM (Taiwan) sinker EDM. I'm looking for generic settings as a starting point for exotic metals. Machine is 240 v, 60 amps max. Also depths of cut would be helpful.
Any info is...
have been machining for 20+yrs
need setting help (general)as to types of steel, mostly exotic metals including .5 thick and very thin .125
Inconel and titanium going 2mm deep
thanx 4 any help!
Smaller step over (assuming cad 3D programs) reduces cusp heights. Maximum cutter size usage will also help. ARAF IS A COMPANY MAKING CUTTERS FOR YOUR APPLICATION AND THEIR TECH AND ENGINEERING...
carbide endmill and helical interpolation is all what will work. and make the thru hole while you are at it. email me at [email protected] and will give you advice and a program free. if your...
need more info on mating materials and material you want it made from.......... brass? nylon if plastics? and have other ideas.......P.S. your tolerances dont seem tight enough for a bushing to me...
More info--running an experimental EDM and proprietary rules apply. I understand the concept, but need a more in-depth knowledge of the application. I'm running 32 electrodes at once and need to...
20 + years of VMC and horizontal. New to EDM, although been around it for a long time. Am running one now and need help with settings for BP, AP, etc. for efficient running, using copper on...