Hi,
1st check to do is to see of ABS and Machine Position correspond, i.e.
position ABS XYZ should show the same values as the machine position when the G54 XYZ is all ZERO (G54 is active)
if...
Type: Posts; User: norbert.barnard
Hi,
1st check to do is to see of ABS and Machine Position correspond, i.e.
position ABS XYZ should show the same values as the machine position when the G54 XYZ is all ZERO (G54 is active)
if...
Hi,
as you did not specified, for i-series controls, as follows,
1. after M30, the end of the normal program, you add the next of sequence number ( in sequence),i.e. last number-99, plus 100 =...
hi,
welcome
you can start by informing us about the machine make & model + cnc control type & model.
el's we have no clue :)
Hi,
as #1100's are often used by the mtb, this method have restrictions.
an individual method is to program i.e. #500=50 before in the cnc file,
then you can use windr function to read a...
Hi,
option C, just read the prepared variable value with windr function every time
Hi,
tool length compensation C is needed to compensate on the parallel axis for Z, param 5001#0=1
Hi,
meaning of [54]
5 = number of digits before the decimal point
4 = number of digits after the decimal point
cheers
Hi, Bertus,
sample:
(SAMPLE,2005-11-03)
(OI-C, OUTPUT=DATE-TIME,PARTS-COUNTER,SKIP-POSITION)
(SET 20=0,100=#3/5/7=1,101#0/7=1,102=0,103=11)
(9600N2)
POPEN
DPRNT[D#3011[80] T#3012[80]] ...
Good morning,
This machine have lost all parameters,
could some-one pls help me with the CNC and PMC parameters.
due to the pmc not being visible and print-out is not available, it is not...
Hi,
there is more than one way to achieve this motion with little effort,
the condition is important:
1. is this oscilation linked in any way to the linear axis movement, i.e. keep oscilating...
Hi,
read the itnc_530__conversational_programming manual for code M148.
that might be what you are looking for
regards
Hi,
this sounds like a cable problem or bad connection inside the mpg unit.
if this does not fix the problem, you can contact me directly.
regards
Norbert
Hi,
is your machine 1 one-path system ?
MGi will not interfere.
regards
the concept you want to use do work, i applied this method regularly.
up to a 9 digit number would work, no limitations, leading zero's does nothing.
as you did not post your original program,...
Just synchronise both path, with the M-code, before M01 is reached.
M01 also stop the spindle, so the slower path can't carry-on
it is the same
Hi John,
the below example is in the fanuc manual:
O9110;
#1=#4001; .......................Stores G00/G01.
#3=#4003;.........................Stores G90/G91....
Hi,
Please find the answer to your 1st mail below;
GOTO[#4314+3]
some info;
then program 9000, T-code call,
i don't see the practical advantage as the file does nothing extra than a normal...
Hi,
the cooler unit is self-controled,
the cnc do not control the cooler.
the cnc only receive RUN or ALARM signals from the cooler controler
check the temparature range settings on the cooler...
one of these examples will create a alarm
Macro A format
b)Addition #i = #j + #k
G65 H02 P#i Q#j R#k;
[Example] G65 H02 P#101 Q#102 R15 ; (#101=#102+15)
Macro B format
#100=#101+15
on all fanuc controls, the very basic dwell command does exactly that, prevent next line processing.
G4 X0.1 (0.1 of a second), also described for this purpose in the manual.
G31 alone in one...
Hi,
could some-one please help me with information on the system macro variables for this control, i.e. tool offset, workshift, program number,.....
should you be able to help with an operators...
Hallo,
from your local Fanuc service center purchase FOCAS1/2 Library disk A02B-0207-K737.
you also need Ethernet function A02B-0303-S707
For the FOCAS2/Ethernet functions, the machine tool...
Now I realise I have explained my problem wrong. In the above example if you look to the circle perpendicular to XY there is an elipse.
But what I try to obtain is an interpolation of two circular...
Hi,
there is only one option, make a "memory dump" with O-9999,
acquier a pc application with a file-split function to extract each individual file and save with its own number, (this is what you...
why don't you just change the switch to the correct type ?
would this not be much SAFER excersice ?
safety always comes 1st.
Hi Paul,
good you found the cause,
it's always good not to duplicate line numbers in the same file..
regards
Hi,
the machine stopped, so the alarm were not ignored.
the display did not changed because setting is 3111#7=1, configured not to change.
change prm 29#5
Hi,
the number next to #3000/#3006 =?? is significant as this number can be displayed on the screen next to the message, so you can know exactly where it come's from.
for complex project's...