Hi Alex,
Maybe you can post your ports and pins settings?
Type: Posts; User: BriBis
Hi Alex,
Maybe you can post your ports and pins settings?
Totally agree, I've never really used the software (other than at first startup when I received the machine). Mach3 is much more the software I can appreciate.
Very cool Andrey..
$250US is momentarily just above my budget, however still nicely priced!!
This is going to be on my need-to-have list :D
Brilliant!!:drowning: :D
Hi,
No, this is correctly configured..
Have you had a look at the G-code?
BTW. You can switch the relay on/off via the Mach3 software manually.. Go to Diagnostics and find the button...
Does Mach3 switch off your spindle relais in the controller?
If so:
Please check your G-code for any unwanted M5-commands (Stop spindle turning).
Maybe you haven't configured M3/M4 commands...
It's my pleasure..
Have great fun using CNC!! :cheers:
Hi Restos,
When I place the piece of NC-data you have posted into a file and try to open it in Mach3, it works perfectly..
I don't know if you have the button "units" in the settings screen...
Yes, you should never have to adjust the settings in Mach3, even if you open a file which is in inches. (This should be automatically adjusted).
Please check if your g-code has the G20-command...
Don't worry! We'll fix it!
If you still are having problems, we will take it step-by-step until the problem has been solved/found!
By the way, did you also have troubles with WinPC-NC? If this...
If you think the machine cannot cope with the speed setup in Mach3, you can always slow the machine down in the "motor tuning" part of Mach3.
If you think you are missing steps, you definetly...
At first, you should never change the units in Mach3 when it is setup correctly, this can screw-up your machine-settings!
When you are opening a file which has been designed in inches, there...
The zero-point set in MasterCam is normally set at the stocks zero.
You need to let Mach3 also know where your stock is located, you can do this by jogging to this point (use the tab-key within...
Ok, see my screencaptures how my Mach3 is setup.
The motor tuning is for all axis the same, this needs some tuning though..
Config/Homing-limits:...
Hi Restos,
Do you want the setting for Mach3 to control your High-Z machine (like the motor-speed and inputs/outputs)?
Do you have some problems on controlling it?
Hi Restos,
A postprocessor is a piece of information to let Mastercam know how to process the data for use with the controlling software (ie. Mach3).
In Mach3 you need to configure your machine...
Hi,
I have the High-Z S-1000, this is mainly the same as the T-version, and Yes it can be used with mach3 (mastercam obvious, because this is a Cam-software.. So no controlling the machine...
Hi,
It is indeed very hard to get any information about this converter, however I've managed to receive some pages of the technical manual of the EWL-4444.
It is in german, but I think it is...
I also work in the electronics (not personally at the SMT-department)..
We use a conveyor which moves the boards to a ESD stacking rack (which can move up and down to specific positions) where the...
The problem can also be caused by your parallelport itself.. (Some) new computers use a low-voltage output instead of 5V TTL logic..
I've run into the same problems with my new PC, I'm going for...
Hi all, I'm not on this forum that long and I used it momentarily just to orient around in CNC..
It's a great help and you guys have a lot of cool machines!