Ok the microfarad of marked uf rating for this cap is 15000UF and 40V.
Just checking the cap with continuity or ohms is not a good check you need to check them with an LCD meter so you can check the...
Type: Posts; User: EPSfoamCutter
Ok the microfarad of marked uf rating for this cap is 15000UF and 40V.
Just checking the cap with continuity or ohms is not a good check you need to check them with an LCD meter so you can check the...
I see. That is not a good thing. Can you give me the part number for the caps and the size of the caps?
Also can your metter test the caps to se if they are good. you may have a shorted cap.
I...
Hi, If your trying to see if you have DC power or not the thing to do at this point is to just set your meter to DC Volts and see if you have the voltage you should be getting out of your supply. If...
Hi
I'm new on here, but I have been looking at the cost for linear slide to build a CNC Hot Wire EPS Cutter. If you are looking for a medium grade slide with .010 reputability 36" long. I know...