Search:

If anyone remembers the code to enter the service menu under Monitor that would be a plus.

From my manual.

E635 Overflow V-Deviation Check: - that the table motion is not blocked
...

The machine started slowing down and using more wire than normal and faulted on us a couple times with this message.

E02 P01?

So I loaded the Auto-Diagnostic software into the machine and...

Simultaneously press and hold the MAIN Menu button ( // top left under screen) and the first soft keys under the screen

should be:

Simultaneously press and hold the MAIN Menu button ( // top...

I know this is a year later but my response might help others.

Switch machine main on,
Simultaneously press and hold the MAIN Menu button ( // top left under screen) and the first soft keys...

I have a couple low tolerance (+-.001") wire EDM jobs that can be cut with a single pass and dropped out.

1-1.5" thick contour length 7-8"
S7 steel annealed provided
CAD contour provided
...

PM Sent

Just a crazy thought but is your code in inches and your machine setup in metric?

I've had this machine for 15 years and it has been great. Recently when I'm cutting the generator, motion, and fast cut pump will shut down but the wire will continue running. Control pad is...

+1 on EDM Network.

I bought a reconditioned Charmilles Robofil 400 from them about 15 years ago. They had a tech show up and set the machine up and train me on the basics of using it. It had a...

Would this include maybe some help getting an Index GE65 running?

I think I just need the subroutines and maybe some sequencing to be honest. The machine data went in fine I can home both...