I just got a mazak QC 20/40 , and unfortunately I didn't get the users manual.
I am having trouble assigning the tools, It wont let me enter tools , or to specify tool pocket numbers, so I cant do...
Type: Posts; User: vsengineering
I just got a mazak QC 20/40 , and unfortunately I didn't get the users manual.
I am having trouble assigning the tools, It wont let me enter tools , or to specify tool pocket numbers, so I cant do...
Hello.
I need to find a Mitsubishi Freqrol FR-SE-2-7.5K-AC servo spindle drive, for a Mazak V 7.5 Machining center.
I am located in Sydney Australia.
Vlad.
After having my machine idle for some time, while I was getting my spindle drive fixed, i tried to start it. When I turn the power On, the damm thing run away on the three axis simultaneously for...
Just to let you guys know.
My machine is finally fixed. :o :cheers::o
A big thanks to Don Sentner (Deckel Doctor). (wedge) Even being on the other side of the world, he guided me on every...
Hi Don.
I never got the 4th axis to work, at the time I was too busy doing 3 axis work, I didn't need the 4th axis so I just put it on the back burner for a while. Now I got a repeat job that will...
I have a Deckel FP4nc mill, this machine can work as a vertical or as a horizontal mill. the problem I am having is that if I want to use the horizontal spindle, my depths will be determined by the Y...
Hello all.
I am having problems with my CNC Deckel (Siemens 3M control).
I need to use my 4th axis (NCT 500) but the C axis does not finish the referencing, so it does not allow me to run a...
Hello Romanlini.
I just got the sensor, really a very well made piece.
I have a job running in the machine at the moment, I will do the testing probably on saturday.
I will keep you posted
...
[/QUOTE]
I would really like to see someone test these hall switches to a high accuracy, which probably needs a nice mill (or lab measuring) setup. With my machine it's flex/backlash/expansion etc...
Hello.
What happen when you try to switch to automatic?
does the spindle start? does it do the toolchange?
Be a bit more specific
Vladimir
:)Finally my machine is back to work!
The problem was on the 4th Axis rotary table clamp signal, even with the 4th axis disabled, by parameters, it still looking for the signal, and will not...
I just had to relocate my machine to another building, after reconnecting the machine it will not run in automatic mode, only in MDI, and even then it does not work OK.
It cannot finish any M codes...
Hello Spickett.
Welcome to the family .:wave:
Do you have the programmers manual for your Mazak?
If you dont have it I may be able to sacan it ans email it to you, but at the moment I am just...
Thanks MrMazak, I will try that.:)
Vladimir
Does anybody in the forum have experience in writting macros/canned cycles?
I have a Mazak V7.5 with a M2 control. Today I was doing some threads (M16 x 2mm) using a spiral tap on a floating tap...
Hi
I just got Griffo and it works ok with my Mazak and my Deckel (siemens 3m)http://www.cnczone.com/forums/images/icons/icon7.gif
Vladimir
Today I got a visit from Roger of Shera Bonett, and everything is working, we connected using Griffo Brothers Cam-Link Data transfer.
Everything works fine, so I put my hand in my pocket and bought...
Hi kevin
tried this morning with the parameters you sent me, still does not work.
whenever I try to save or load to CMT I get ERROR 448 CMT MALFUNCTION
If I try to save to computer, the...
Hi Kevin.
I have tried to download to the machine using both the Tape and the CMT connectors, but it didn't work, I am using Mastercam, and I setup my computer as follows:
Format = ASCII
Baud...
I will talk to Roger.
Thanks for the info.
Vladimir
Let's try again, this time after reading the FAQ'S:confused:
52635
this is a picture of the controller cover with the board numbers.
52636
this is a picture of the controller without the...
Sorry the pictures didn't came up.
let's try again...
<a href="http://s244.photobucket.com/albums/gg30/vsengineering/?action=view¤t=CNCBOARDS.jpg" target="_blank"><img...
Hi Kevin
I just looked at the diagnostics screen and I found the following:
Version:
1-1 B01 : C1 1-5 2 100: * 6 ENGC1
1-2 D01 : C1 1-6 3 200: B
1-3 D02 : C1...
Hi Phill.
I do have a FX17 board in the controller but I dont know if I have the DNC-A, where is it supposed to be located?
Kevin.
I am no tin front of the machine now, but tomorrow I will have...
Hello I just joined this forum, looks like there's a lot of people willing to lend a hand.
I recently got a Mazak V7.5 with a mazatrol Cam M2 control. I have tried to communicate with the machine...