Search:

thanks Al thats exactly what i needed, i had no idea FC FA and FB were the relay terminals!
Raptor

have you seen these? https://www.amazon.com/dp/B0775XWYVJ/ref=twister_B081J68S3K?_encoding=UTF8&psc=1

i'm not an expert but it can do 400hz and should be able to manage the 800w.

i had one for...

Hi i just installed a 220v 3kw HY series Huanyang VFD for use with my 2.2kw spindle and i was reading the manual and saw that there were 5 output terminals, DRV, UPF FA FB and FC,

i see that what...

PD008=220 did not work. it immediately went to the E0 CA error

PD008=110 works

does anyone have any input here?

I think im going to go with these settings, any reasons why i shouldn't?

PD000=0 for Parameter unlock ( 1 ) for Parameter Lock

PD001=1 (1 For Remote Control) ( 1 For 0-10v Terminal Control or...

Hi,

i have a CNC using mach4 and a warp9 ess and i have added a diode laser to it. i have made everything work but right now i have to manually modify the gcode to add in the laser gcode.

i was...

Hi All, last night my spindle stopped mid job with a E0 Cn error. this is the second time ive had an over current error, last time it was the spindle that was dead, i suspect this one to be dead too...

That's what I've observed too. 2.2kw at 110v is 20a. I have mine on a dedicated 30a breaker

i have a Huanyang VFD 110v 2.2kw HY02D211B-T

that but 110v...

thanks, the new one has the ground wire and im running car coolant instead of just water this time.

this was a machine that i purchased used and was working so there are a few bugs to get out....

Hi i recently had an EOCA or Error over current on my VFD, did a whole bunch of debugging and decided it was the spindle that was dead. So I ordered a new one and took apart the old one.

what i...

Rest of the photos...