Yes , it happens with suck lite card, and ezcad 14.16 is also not practical to use.
I sold a machine with lite cart to a customer and the same thing happened, it only ran on the notebook. I had to...
Type: Posts; User: oneeye
Yes , it happens with suck lite card, and ezcad 14.16 is also not practical to use.
I sold a machine with lite cart to a customer and the same thing happened, it only ran on the notebook. I had to...
Hi, LITE card only run with EzCad 2.14.16 ,
Earring fiber laser cutting. 65 x18 x 0.7mm - Brass
50W Raycus marking machine.
https://www.youtube.com/watch?v=YtAm6A6BpD8
Hi,
it is much, much cheaper for you to buy a sealed laser tube and a source, unless you want to assemble a laser tube for pleasure.
If the tube came with broke IN or OUT water glass pipe it is easy to fix with UV adhesive or even epoxy, but in your case no way, u can use as decorative in your workshop.
as
No problem, i've already cut aluminum foil used in the kitchen, it's very thin. Will make a video tomorrow cuttng a kitchen aluminium foil with same shape as him photo.
I use a 50W fiber marking machine to make jewlry. I make deep marking and cutting silver, gold, brass, aluminium max 0.8mm thick.
I use hatch mode to cutting plates between 0.2 and 0.8mm, but if...
Hi,
i aways use ezcad 2.14.10 in old JCZ card and never had problem.
This time my machine supplier in China assembled a machine with a new JCZ Lite card, it only work with ezcad 2.14.16. I...
Special Forces medal engrave and cut with my 50W Fiber laser marking machine.
Brass 1.5mm , 30mm diameter
DXF file to download.
465778
https://www.youtube.com/watch?v=Q1GSmxlCpLU
Here is a medal engraved and cut with my 50W Fiber laser marking machine.
1.4mm brass , 30mm diameter.465770
https://www.youtube.com/watch?v=Q1GSmxlCpLU&t=4s
DXF file to download.
did you install the " All in One " and " X64AMD_LmcV2u " driver correctly?
Hi, the drive come with ezcad, The drive is same to any ezcad version for V2 or V4 card. I use ezcad v 2.14.11 ou 2.14.10.
Hi, yes i did. My machine don´t use donglle, but a v4 card, software and drive.
Well, i tried everything, I changed the card, usb cable, I checked all the wiring and it didn't work , when I was...
You will need a fiber laser with 200W at last for good finishing, Are you sure is 0,02mm and not 0.2mm?
80W can cut 1/4" easly , around 10mm/s. Are you sure it is perfecly aligned? Are you working with correct focus?
If you use v4 card ( no dongle) it can be static - you must disconect usb from card and connect again. Other problem, dead card power supply . i had this problem, i tried everything, chage cable,...
Finally we finished assembling our first laser welding machine.
I use a new GW Fiber laser 1Kw source, is a new technology laser, very small size, ligth weight and have wireless telemetry.
No...
Hi,
i assemble fiber laser machines. I think your machine use an old control card, if you want to keep the card and use another version of ezcad you need new dongle, when old card each ezcad...
What material r u trying to marking?
Hi,
to cut material that burn like wood , cardboard, or melt like some polymers like ABS, poliurethane, PP, etc you need cut at high speed, it means you need power, 90w or 130W and a good air...
I have two YAG marking machines, one is working perfectly, another got the dead module. I have a 50W fiber source and jcz v4 control card so i removed all the components from onld yag and took...
Hi,
fiber laser do not makning wood but burn, You will get coal to weekend barbecue.
Hi all,
I have a PSU 80W, it was working fine but suddenly the laser become weak, the tube is ok, i check de PSU and the voltage is ok ( 40Kv) but the current now is only 5mA. ( the correct is...
Hi all,
i have two 30W fiber laser source from marking machines, IPG and Raycus , i want to install the fiber dource on a small co2 laser cutting machine. The machine use a Ph card, similar to...
Hi all,
i have two 30W fiber laser source from marking machines, IPG and Raycus , i want to install the fiber dource on a small co2 laser cutting machine. The machine use a Ph card, similar to...
Hi all,
i have two 30W fiber laser source from marking machines, IPG and Raycus , i want to install the fiber dource on a small co2 laser cutting machine. The machine use a Ph card, similar to...
Hi, so you need two machines.One Fiber marking machine with 50W ou 100W to engraving and one Fiber cutting machine 700W or 1000W , but not normal fiber source, a NLight fiber source is needed ,...
80/90W tube is nice to normal cut and engraving.
Hi all,
i use ezcad to make deep making, to do it i use: ( A ) one pass at low speed/high power 90degree + ( B ) one pass of same but 0 degree, and ( C ) one pass at hight speed/low power (...
Hi, with 50W u will cut 6 to 8mm acrylic and 3mm MDF with good finishing and prefect engraving. 80/90W 12 to 14mm acrylic 6mm mdf ( 8mm with low speed and some burn) good engraving . High power...