Search:

Tim,

Just emailed you pictures. Sorry for the late response. I ran to the shop to get a few good pics. Hope they help. We will get it figured out.

John

Tim,

PM me your email address. I will send you pictures of the inside of my cabinets.

John

Tim,

Send me a picture of the other side of the cabinet. I didn't see any grounds in the picture you posted.

John

If you look on the side of the control cabinet there will be a allen head with a red tag. That tag will have a few lines on it with a green/yellow wire connected to it. That is the ground for the...

L1 and N are the two hots. Then you should have a ground on the side of the control panel. The green wire goes there. There is no neutral. I suggest using 10/2 SO cord. Home Depot has it for about...

I think I might have a hard copy of it at my shop. It's not really much of a manual but I can scan it and email it. Are you have an issue with the machine? If I can help in any way let me know. My...

What manual are you needing? The one for the DSP or one for the machine?

John

259170

Hey Tim,

I use King freight in LA for all my brokering and freight forwarding. They are great. My contact there is Peter Sen. If you PM me I will give you his contact number. He is bring in four...

There is some important papers that need to be filed. It's kind of confusing. I have imported 4 of these things in and I will suggest hiring a broker. They are not expensive. If you need a...

Hey Jbob,

You will love the machine. I currently have two of them in my shop. I run them everyday for hours at a time. I have had no issues with my Omni 1325. As soon as we get moved into our...

Eric,
Look for the spoil boards on Tuesday. I have to open up Remo's Tuesday morning so I will get them to you as soon as my Dad shows up. Sorry it took me a few extra days....... :)


Sent from...

I have two Omni 1325 machines. The one machine that is in my shop now has been running everyday about six hours at a time. I have not had one single issue with it. Out of the crate it was 100%.
...

I have two of the OMNI 1325 Machines. One runs Mach3 the other is a DSP. I will suggest a few things to purchase with the machine.

If you decide to go with Mach3, I recommend the wireless MPG. It...

That is a great choice. Please contact me if you need any help. If you go with a mach3 setup I have the XML file for the machine setup.

John


Sent from my iPad using Tapatalk

I have two OMNI1325 machines. One is here and runs everyday 6-8 hours at a time. The second one will be here next week. My current machine runs Mach3 and the one on its way has a DSP controller. If...

Yes it looks like you have limits/home switches. My OMNI is wired the same way. It sounds like your Mach3 settings need a look at. I am more then happy to help you. Post a screen shot of your ports...

I ordered a laser from Gweike. It is in the US now and I am waiting for it to show up at my pickup location. The ETA is the 24th. It was $550.00 in duty fees and other port charges. This is the third...

Nick,

Looks like you are correct about not having a A driver. Looks to me like the switch must redirect the step and dir signals from X to A. I think you should be good to go now. Just set the A...

Nick,

In order to have XYZA you will need to have 4 stepper drivers.
Try setting your A to the same settings as your X. Turn the switch to A and they that. If you get movement then you know...

Just to clearify I still have a Shopbot. And yes I did buy a Omni. I would buy another Shopbot or another Omni. Shopbots are great cnc machines. You can't go wrong with one. The community on the...

Make sure your A axis is enabled in the port and pins portion of mach3. Set it for the same port,step and dir as the X. This will allow Mach to see it when you disconnect the X and plug in the A....

You will most certain want to replace the pinion gears. This is a $50-$60 investment that you will want to do. Check the rails where the v bearings roll on. You want to make sure they are not gauged...

I have owned two shopbots. They are great machines. I still have one in my shop that I use. Not sure what they are asking but just to give you some reference. I just sold my 48x96 PRT Alpha turn key...

You are going to love your Omni 1325. I run mine 7 days a week, 6-8 hours at a time. It's the third machine I have and by far the best. If I can help you in any way if you have issues please just...

I think this is a good place to show off my widgetmaster master piece. Eric is, well for the sake of it part of my family (not really but have known him almost my entire life). This machine was a...

Well it looks like its about time for shrimp parm!!!

John

Yes I did. I will be doing a write up on it soon. I have not hooked it up yet, waiting for the electrical company to finish there work.

John

You can do this for free. All you need to do is find an empty pin on your port. Goto ports and pins in mach3 and select the inputs tab. Scroll down to the probe and turn the red X to a green check....

I purchased a machine from Omni-CNC. It is the 1325 model. I can't give you any advise as I don't have it yet. I will be able to tell you everything you need to know on Thursday. The machine arrives...