584,846 active members*
4,577 visitors online*
Register for free
Login

Search:

Type: Posts; User: Iron-Man

Page 1 of 12 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    1,332

    Re: Possible VMC to buy for controller retrofit

    Hello Rabler

    The Yaskawa servos { SGDB-15ADG } can be run in velocity, torque or step-direction mode. You can use Mesa Cards, Linux CNC, or Path Pilot. There is a learning curve but there is...
  2. Replies
    5
    Views
    679

    Re: Seeking vintage chip MB8702 info!

    Please re-check the part number. This is the closest thing I could find (16 Bit A/D and D/A Converter by Fujitsu ) : https://www.jotrin.com/product/parts/MB8702

    If this is the same chip, see...
  3. Re: how to run Yaskawa 3 phase 200V servo using 1 phase 200V?

    Hello Syphonics !!

    Try calling American Rotary.
    "American Rotary phase converters are perfectly suited for precision metalworking equipment such as wire EDM’s, CNC lathes, CNC mills, and other...
  4. Replies
    6
    Views
    1,042

    Re: floppy 8" to pc

    Hello maxlopez

    These links may help:

    https://webstore.kryoflux.com/catalog/product_info.php?cPath=1&products_id=30

    https://kryoflux.com/?page=kf_features
    ...
  5. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    I cannot reply, you must enable private msg reply.

    My msg:

    Hello Daryn

    I purchased a drive on ebay just to test and evaluate the Faulhaber CAN interface. The software (Motion Manager) makes...
  6. Replies
    84
    Views
    10,364

    Re: Motors for small production machine.

    I purchased my machine back in 2014. It had no computer, control box, turret or disks. Just the machine.
    I have been searching for the Denford Turret for years with no luck. One came up on ebay a...
  7. Replies
    84
    Views
    10,364

    Re: Motors for small production machine.

    Hello Strantor

    I refitted a Denford NovaTurn with IBOB2, AMD GizmoSphere I, Yaskawa SGDA 01AS Servos, Mesa 6i25 / 7i77. Pathpilot is the control. Analog +- 10V fully closed loop.

    See my work...
  8. Replies
    4
    Views
    1,070

    Re: Allen Bradley Ultra3000 and MPL servo

    Hello JCSB

    These are not connect and run systems, they must be set and configured for the connected motor type.

    The manual:...
  9. Re: Need help brushed servo moves in wrong direction

    These are analog brushed dc servo drives. If the motors run in reverse and they are under control ie (no runaway), then you could try reversing the +- 10 volt drive signal, pins 4 and 5 and /or Pins...
  10. Re: NVEM V2 connect to AC SERVO DRIVER AASD-15A-V6.3

    Josip

    I believe that i have located the manual. Please see pages 27 and 80, Pn096? The command pulse input mode.
    This should get you going in the right direction. There is also a rs232...
  11. Re: Compact 5 cnc conversion to servo's and Linuxcnc

    Nice work!!

    I converted a Denford NovaTurn to Yaskawa AC Sevos, Mesa 6i25 - 7i77, AMC DC Servo Drive for Spindle.
    My system is running PathPilot, +- 10V Torque Mode fully closed loop.

    Iron-Man
  12. Replies
    4
    Views
    1,184

    Re: B and C axis with PathPilot

    Although Tormach went to the effort to personalize my Shuttle with my name ("Step" :)) I decided I could put it to better use.
    Perhaps not for the fainthearted.

    Step[/QUOTE]



    Hello...
  13. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Hello Letomoto

    Have you tried just getting one node completely operational?
    I do not have a compatible motor so I am at a disadvantage. I have seen some motors on ebay but they are expensive.
    I...
  14. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Great !!

    Iron-Man
  15. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    I am still working on the interface.
    See section:2.4 Operation using own host application, page 13 of the CAN Open Manual.

    The "h" is for hexadecimal. Note that the CAN-ID + Node-ID gives...
  16. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Hello Letomoto

    I have made some progress with PCAN View, but it is very limited. The problem seems to be issuing the correct CAN ID. I did get a response from using CAN ID 702h.
    The Object...
  17. Replies
    12
    Views
    5,122

    Re: Single Board computer for LinuxCNC

    Hello wyzarddoc

    I have not looked at the Beaglebone SBC. If it only had a PCIE interface. I have not looked into this SBC, there may be a way to create a PCIE from its IO?

    Iron-Man
  18. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    I will try to use pcan view and see if I can enable the system.

    Iron-Man
  19. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Hello Letomoto

    That sounds good. You may also be able to use a PIC micro.
    Another problem is that they require analogue hall sensors for the 2 pole motors.
    I have brushless motors, but they...
  20. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Hello Letomoto

    I still have not been able to establish a connection yet.
    These devices seem to be extremely picky with the CAN interface.
    I believe that my controller maybe a little different....
  21. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    I purchased one from Ebay to try the CAN interface,Faulhaber MCBL3006 C 3085. Is this the model you have?
    Can you post a picture of the power side connections.
    I am using a Peak CAN FD USB device...
  22. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    How is your progress?

    Did you do anything special with power connections?

    Iron-Man
  23. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    The images are too small to make out. Bu yes, you finally have a connection with a identified node.

    Post higher resolution images of the screen. The CANopen manual will tell you how to configure...
  24. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Hello Letomoto

    Your problem has to be in the physical CAN layer. Disconnect the CAN interface and redo it like I suggested. Please see attached image.
    In addition, follow chapter 5 of the ESD...
  25. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Ok lets try this.

    First send me the model number of your ESD CAN BUS Controller, the picture disappeared?
    There is CAN A 11bits and CAN B 29 bits. Make sure that this is correctly set for send...
  26. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Have you downloaded the CAN OPEN communication manual?
    The document contains the commands to issue in order to commission the drive.
    I cannot tell from your wiring, but there appears to be no...
  27. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    It is possible, the slave is probably a servo drive. Your main controller should be the master and the attached servos would be slaves. Go back to the basics. Try to set up your controller with...
  28. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    [QUOTE=Letomoto;2359610]i tried with one resistor on the H and L pins but it doesnt find it and the CAN interface i am not able to send random stuff and receive when the resistor is there.


    when...
  29. Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!

    Do you have the proper termination resistors set at the end points? They should be 120 ohms.

    Iron-Man
  30. Replies
    17
    Views
    3,381

    Re: crane style cnc machine

    Hello Dingo117

    If I understand you correctly, you will need to convert Cartesian coordinates to Polar coordinates. This is very simple to do.
    This link will help you to get up to speed.Polar...
Results 1 to 30 of 332
Page 1 of 12 1 2 3 4