The Engine Guy,
Appreciate the info. I will download the trial version the re-seller has sent me and see if that option is available. I only have a few days to test this version so want to spent...
Type: Posts; User: lenny09
The Engine Guy,
Appreciate the info. I will download the trial version the re-seller has sent me and see if that option is available. I only have a few days to test this version so want to spent...
Hi all,
Anyone willing to share a turn/mill post ? Lathe with live tooling & a sub spindle.
Have a few days to try out the software but the main reason I got the few day trial from the re-seller...
Hello if you dont mind sharing the post can you email it to me?
Anyone have a copy of Manual Guide I for PC?
Thanks in advance!
I made my geometry in Bobcadcam for a simple lathe job. All i'm doing is a starting a Z0. with a corner radius of .015 to a 45 degree angle to another radius (.250) then boring back -1.5 inches....
Has anyone using Bobcadcam ever adjust the post to use G68 with sub programs?
Really would like to see probing added to Bobcadcam as it is in Solidcam. Noticed these two software's have the same simulation modules.
I'm sorry using version 25 & 26 at the moment. Don't have any 5 axis modules. :(
Was wondering if this would be possible on a lathe.
Using a G71 canned cycle type 2 with cutter comp on G42?
Simple thread relief undercut on od of part. \____/ <<<Somewhat how the geometry is....
Hi all,
Using V26 and wanted to know if there is a way to get your absolute position in the statistics in machine sim in lathe mode? I know this tends to work well with Milling but didn't work to...
I did BlakeC. You should try him. I would rather recommend him then Jeffcnc. Jeffcnc isn't all that great with more complicated stuff. This guy here knows what's he's doing. 👍👌👌
Can someone help me with a C-axis post for Gibbscam. Machine doesn't have a y-axis jusst a c-axis. Fanuc.
Thanks in advance.
Go to settings default - Units then depress Lathe Diameter Mode
No I only have Compost 2, You have a Copy of Compost 3?? Sure wouldn't mind upgrading.So can a groove Canned cycle only be compiled in compost 3?
Need help in writing a canned groove cycle for gibbscam post. I am using compost 2 will i need compost 3 for it to work out?
Thanks!
Hey I tried the link but no luck , you mind uploading it again? or send it to my email
Hi, Looking to see if anyone here is quite familiar with Compost for GibbsCam, and how many versions of the software there is.
Thanks!