505,967 active members
2,572 visitors online
Register for free
Login

Search:

Type: Posts; User: JFettig

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    49

    Re: Haas HRT210 motor replacement

    https://www.yaskawa.com/delegate/getAttachment?documentId=TSE-S800-16&cmd=documents&documentName=TSE-S800-16E.pdf
    page 31
    "2 8192 P/R incremental" sgm-08u2ha12
  2. Replies
    7
    Views
    49

    Re: Haas HRT210 motor replacement

    as you've already found, plenty on fleabay. Make sure you get the correct part number. It's more common to have a different encoder on the ebay options.
  3. Replies
    25
    Views
    190

    Re: Haas Rotary Castings

    I am willing to bet most just send them into the HFO to get serviced. I've only had the brake off of mine.

    I'd imagine it's pretty meaty except for where the worm shaft goes through.
  4. Thread: HAAS P-Cool

    by JFettig
    Replies
    7
    Views
    179

    Re: HAAS P-Cool

    Someone probably added it to maintain positive pressure to keep coolant out.
  5. Thread: HAAS Drives

    by JFettig
    Replies
    2
    Views
    139

    Re: HAAS Drives

    Tool Changer. Probably a SS machine.
  6. Replies
    4
    Views
    251

    Re: Haas Vf2 8100-rpm or 10,000-rpm Spindle

    It appears they run the same motor. If you're cutting aluminum or steel with small end mills you'll use all the RPM. If you're doing production it's a no brainer to get the faster spindle.
  7. Re: How large a Face mill diameter on a VF-2SS?

    I run a 3" Seco Quattromill on a regular basis in my VF4SS and VF2 - both sidemount tool changers. I mark the tool heavy in the SS.
  8. Replies
    9
    Views
    272

    Re: Tool Release Piston - Shims

    Does it sound like the solenoids are running properly?
  9. Replies
    16
    Views
    518

    Re: 1/4 NTP THRU 304 BAR

    Definitely thread mill.
  10. Re: SOLIDCAM FIXTURE COLLISION (BETWEEN STOCK AND TOOL)

    What did you end up with? I too found a bunch of bugs, but I have yet to run CAM software without a ton of bugs in it.
    The cool part is that they have been very responsive in fixing the bugs.
  11. Re: SOLIDCAM FIXTURE COLLISION (BETWEEN STOCK AND TOOL)

    Report the bug, they have had all kinds of bugs like that in the past, select one thing, another thing changes.
  12. Replies
    3
    Views
    348

    Re: Help HAAS SMTC Doble Arm Motor Problem

    Did your cambox leak out all it's oil? The double arm seal degrades over time and if you don't replace and replenish the oil it can get dry in there.
  13. Replies
    3
    Views
    467

    Re: Conventional milling

    To answer the original question on how to do it, when you select the geometry - you would want it to point the other direction, then under technology switch the path to the right instead of the left.
  14. Replies
    46
    Views
    3,655

    Re: New Mini Mill landed safe and sound

    What Ydna said, G154P1 G154 P2, etc. You can also use G110, G111, etc. Your post processor should be set up to handle it one of these ways.
  15. Replies
    4
    Views
    430

    Re: miiling chmfer on difrent level serfes

    Use HSS user defined projection. Select the surface, select the upper or lower curve and a tool big enough to do it. I usually use a ball mill for chamfers like that.
  16. Replies
    16
    Views
    3,154

    Re: Brushed to brushless

    I think the transformer looking piece(I think this is the actual inductor) is sold separately, not 100% sure. I don't think these are available anymore.
  17. Replies
    38
    Views
    3,152

    Re: Glacern Cat 40 tool holders?

    Dorian isn't really known for their CAT40 tooling - my opinion is to stick to known stuff.

    Syntillo 9918 is great for GP usage - I only change mine once per year at most.

    Techniks collets work...
  18. Replies
    38
    Views
    3,152

    Re: Glacern Cat 40 tool holders?

    Matt, you're absolutely on point. I do have one Mari collet - I don't think I have used it yet but it definitely doesn't look as nice as Techniks collets.

    It's my understanding that Glacern is NOT...
  19. Replies
    38
    Views
    3,152

    Re: Glacern Cat 40 tool holders?

    Kurt HDL4J is probably what you want. Orange vises do look nice but I'm in the same boat, I don't have deep enough pockets for that!

    I currently have 3 Chick BL4's for my 4" double vise work, got...
  20. Replies
    38
    Views
    3,152

    Re: Glacern Cat 40 tool holders?

    I've been running Techniks collet chucks and Maritool hard holders. Techniks stuff I've been getting from allindustrial, I buy in quantity and they give me good pricing - same with collet sets....
  21. Re: Setting tool length offsets without the wireless probe system

    Yup, I did! Luckily I have cheap collets and runout on some of them cancel out some of the runout in the rotary ;)

    I'll have to get some quotes on a rebuild.
  22. Re: Setting tool length offsets without the wireless probe system

    It's working great, thanks again! The screaming deal I got on the S5C wasn't super screaming considering it has .002" runout - might have to get it rebuilt.

    The thing i like about the Edge...
  23. Re: Setting tool length offsets without the wireless probe system

    I use an Edge Technologies tool setter Pro Touch Off Gage - Edge Technology

    It sets to 4" above the table - I always set off the TABLE on the same location on the table with all the tools at the...
  24. Replies
    12
    Views
    1,520

    Re: Alu - best roughing tool

    I really like the YG1 Alu-Power end mills, they work very well and produce very nice finishes - better than SGS. SGS seems to take more abuse. For the money, I stick with YG1 most of the time for...
  25. Replies
    6
    Views
    762

    Re: Haas overrides Something weird ?!?

    I'm 99% sure mine goes way over 200% as well. It might go to 400, but I can't recall, I don't generally crank it up that high.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4