Search:

2015 model MILLTRONICS VM2016 WITH 4TH AXIS ON EBAY
https://www.ebay.com/itm/164929971567
THANKS!

Is there a setting that will not show all of the macro language that scrolls during program execution? I have an operator that just wants to see the g code. Machines are Cent 6. Thanks

There is a drawbar delay parameter that you can change.

Goto Milltronics.net and I think there is a footprint there.
As far as height, it will just fit under a standard 2 car garage door opening.

I sent mine to Ideal Service and they fixed it. IDEAL Service, Inc. VFD - Variable Speed Drive - AC Drive - DC Drive - Service

What size LCD did you use?
Thanks

I have a Milltronics post that I have been using for about two years. It took me a while to get it exactly like I wanted. I don't know if you use cutter comp, but Visual Mill creates the toolpath...

If the spindle will orient, you can make a quick "pick and place" type toolchanger that will hold probably 6 or 8 tools. Just make a rack that bolts onto the table on one end and program the mill to...

I quit touching off tools on the machine about three years ago and have not looked back. It was amazing on how much time it saved me by presetting tools.
I don't know why anybody would want to touch...

Normally, I have actual tool lengths in the offset page and just set the Z coordinate for part zero.
Thanks

So, I would create a program that would contain the h & d offsets (using the correct P number) and read it into the control and run it?

I am setting up offline tool measurement (H & D offsets).
I do this now (presetting tools), but I have to manually input the data to the control. I have 5 Milltronics machines. It would be nice to...

They might be specific to Milltronics machines.

Anyone have a list of Dos commands that can be executed from the program.
DPRINT, SET, CLR .....etc?

Yes,
I have all of the boards for the control.

Helical interpolation from the cam is working. Just trying to get spiral pocketing to work. I think that the conversational "pocket circle clear " has spiral movement in it, but made up of individual...

Mine will do the thread milling (tapered and straight) from the conversational screens also. I think they achieve this with the parametric language. Just trying to set up Visual Mill cam software to...

The plane would be just done in the 3d workspace. Just insert a plane at an angle to one of the axis. Get the measurement and then open 2d sketch on the face of the column to be "cut" and draw a...

You could insert a plane (angled) that represents your roofline and get the measurements from that. Hope this helps.

Will the Centurion controls do this? Basically adding a "Q" for the spiral lead in a G02,G03 line.
Thanks

I think AMC sales on ebay has done this to one a few years ago. If I remember, they had to install a Y axis onto it. (linear rails, ballscrew, motor, drive etc)

My ML17 is about a 97 model and the coolant pump is three phase.

One of my friends in the machining business said that he was on the phone w/
Bobcad and they said that any person that had bought version 22 got the newest version for free. Is there any truth to...

Both the generated leg and the 1 phase leg.

We are using a 40hp phase converter and are experiencing a voltage sag of about 20 volts when running our cnc lathe. Only when ramping the spindle up to speed for less than one second. Anyone know of...

Mine also steppers.

Have had a ML17 for 11 years now and has been a good machine. Only have had to replace belts and the braking resistor for the spindle-nothing major.

Got this alarm on the VM 17 today:

"protected mode error 8003 at 0020
36c9 from 01f7 2da protected
mode error 8003 at 0020 3669
from 0020 3910 -- dpmi
insufficient stack space to process...

Yes, I still have all parts. PM me.

What is the largest size phase converter that can be run from a 200 amp single phase source?