Fixed.
It was the step low active that I had checked in motor outputs. When I unchecked it and tested it everything worked correctly.
As one who is still learning tons of research and reading...
Type: Posts; User: Kirb2
Fixed.
It was the step low active that I had checked in motor outputs. When I unchecked it and tested it everything worked correctly.
As one who is still learning tons of research and reading...
I believe the parameters are correct. I can check the voltage tomorrow. Just didn’t know if there was a setting in Mach3 that I’d checked or unchecked would reverse the speed — I.e. port/pins under...
Need some direction with a Sunfar e300 with 1.5 water cooled spindle.
I can turn on/off and adjust the speed of the spindle with Mach3. However, it seems that the spindle speed is somehow...
Any guidance or advice on addressing the VFD only reading p.off? Can’t really find anything that really speaks to what is going on there.
I upped the speed in motor tuning and in brought it up to speed. I guess once all is working I’ll have to dial it in.
I took the motor off and it is what is binding. However, it works if jogging...
I recently started trying to set up a JCut 6090b that a friend purchased 3 1/2 years ago. He never used it or set it up. It sat in his wood shop this whole time. Now I have moved it and started...