I am sure one day that setting will be discovered.
Soft limits is good enough for now. The physical switches will double up as limit switches.
Type: Posts; User: lazercut
I am sure one day that setting will be discovered.
Soft limits is good enough for now. The physical switches will double up as limit switches.
And where is this aetting hidden? Thanks
Is G28 Home location coordinates you are referring to?It's all zeros when the problem happens.
Try reassigning the hot keys
When i do Homing using physical switches, everything goes well except the DRO for the machine coordinates is not showing zero but it shows positive number for x and y and a negative number for the Z...
The problem was I have not key in the Spindle speed for the motor.
Ok it's solved. Thanks
I have this exact manual and already setup the parameters on the VFD as well but spindle is still not turning via Mach3. What numbers in the Output signal should I key in for port and pins? Anyone?
I have a MKS4-V board made by a chinese company called Cheng du Xing Cheng Technology Co. LTD. I have connected the 6 wires for controlling the spindle. It can control the spindle using the VFD...