Search:

Hello, we have a Victor CNC Lathe 1840i DEL, this machine has a noise in X axis when rapid traverse. It holds tolerance well and. leaves a good finish, juat the noiae when rapid. Also. would like to...

Hello, could anyone advise me on the Emco 320 cnc lathe w/fanuc otf and, a Sauter 0.5.480.408 turret. Does this machine random index when indexing to next tool (go shortest path).. thanks.

Thanks, we have a small manual marked PMC. Whether it is for this machine i will have to check. this machine was bought, supposedly in working condion. But, i haven´t been able to do much with it...

I thank you for your reply. Now i just found out that you just can't go to the para/dnos page and page to the ladder diagram. I was told that i had to set a parameter to activate taccess to the...

we have the follwing alarm,
alarm # 1013 TR.. NOT BRAKE.
We can't find it in any of our manuals. Could someone advise us on this. Thanks.

Have a Charmilles Roboform 20 1993 model, that works fine, except, the crt will not come up. I am not familiar with Charmilles, or any EDM machine. Have checked all the obivious, vltge, fuse, etc......

thanks rodney247 you have given me some good info. Actually, since i started posting on the problem with the ATC. I really am grateful. I was wondering where the magnets for the sensors on the atc...

Another question on this subject. If the hall effect sensors sense magnetic field, where are the magnets for the home/spindle position? I thank you for your help and, patience.

Good morning, i thank you again for all your help on this. A question on the roller limit switch. This switch is open, in fact, even actuating the pluner it stays open. To me, this indicates it is...

Thank you, are these available commercially or from Fadal.? regards.

Thanks for your reply. We are not really familiar with this control. Have an operaror that has experience with the basic operation. and, we have only a couple of copies of manuals. I have been able...

God morning, another question on this subject. does the cnc 88hs control have a way to check contact conditions like with a plc? I have a doubt about the Hall effect´s sensors, and don´t know how to...

Hello rodney247, thanks for the manual. We do not have this.

Hello Mike 283, i thank you for your reply. This really help me understand a little better how this works. The micro switch is normally closed right? Thanks..

Hello, we have problems with the above mentioned machine. I don't know this machine at all. I did notice some time back, when they had the cover off, top of the tool changer, there is a shaftwith...

Saludos, we have a Fadal VMC 3016. I noticed that this machine does not have an air pressure alarm and, machine will keep working even though have no air. Is this right? Thanks for any feedback on...

We have an Katsuga R-7 mill w/ Dynapath 20 control. When running the spindle and want to change direction, ex: m3 to m4 for regardless of rpm i am running, will not change directions. Have do an m5...

Hello, i wonder if anyone here has any idea what these controls are for? I am posting a picture here. Thanks.

Hello, we have a Kasuga milling machine, Model: R-7, w/ Dynapath Delta 20-ME cnc control, Fanuc spindle servo unit # A06B-6044-H007. We don't have any manuals for this machine, except the Dynapath...

Hello, We have the following problem with the above mentioned machine. First, I need to mention machine had been out of service for several years and, really don't know well it was maintained. The...