Thanks for the info. We are up and running!
Type: Posts; User: GTMondock
Thanks for the info. We are up and running!
I have the same amp with same problem. The links to reference zero do not work. Does anyone else have the procedure?
Thanks
So I dumped the program and reloaded it and its running. I took a photo of old program and it looks exactly like the one I have saved on the CMT. Strange.
I have 4 minutes of experience on this machine so please bare with me. Also 4 minutes of looking at a Mazatrol program.
Operator told me that program would not run anymore and had alarm 822 Illegal...
Hello
Has anyone every tried to remove the hydraulic motor/pump on the Mazak? Looks like it is built into the top cover of tank which doesn't seem right. Maybe a 1/4 turn to lock? Motor is turning...
We had purchased this used machine with no books and have been loading programs with a floppy. I used a cable from a machine that has a Fanuc 0 control assuming that they have the same pin out for...
Table was moving while heavy cutting on the one end so we decided to remove and have both X and Y ball screws resurfaced with new bearings. After machine was put back together the Y was moving sloppy...
Hello
We have a Hyundai with Fanuc 0-t. When we bought this machine it had a tool eye that has since fell down during auto and destroyed the setter. We had removed the tool eye and now having...
Doing ID threading using G76 code with no problem Changing Parameter 3708 bit 0 to 0.
Thanks for all your help Ant29018 !!!
I changed bit 0 on parameter 3708 from 1 to 0 and it worked !!! The other guy chimed in and said that it will cause problems with thread cutting if bit 2 of parameter 3708 is also 1 but I will check...
Hwacheon HI-Tech 200A Fanuc 0i-tb
Yes I did.
G0G40G98
x0.z0.
G1Z-1.F50.
Once it reaches the G1 Line it stop. Will start axis movement with DRY RUN and if I take it off it will finish its stroke in the specified feedrate.
Still no luck. It says no feed rate specified when using G94 and illegal G code with G95. When I put it back to where all the other machine are and press dry run to get z to move then immediately...
At the beginning of the bar puller I use G0 G40 G98. All programming is in inch. Should I try G95 in place of G98?
Thanks for your time.
Trying to use a G1 with z moves for a bar puller. When this line is reached it stops and shows the correct distance to go but will not move. If I turn it on DRY RUN it will move and do the cycle...
Had this happen twice on 2 different machines. Replaced both power and feedback cables for axis and problem solved. Can't guarantee this is your problem but it was mine. If its jumping around I would...
Machine use to have a tool eye. After falling during automatic mode we no longer have the tool eye... I was wondering if anybody knows the option parameter to have the tool measure soft key in the...
Anybody have one or know where I can get one ? Preferably used but a rebuilt one would be nice also.
Thanks
Found 2 cracked tubes so i replaced them and put new o-rings of the other 2 tubes. And also replaced the trigger o-rings. Did an internal leak check and it was great, no leak. From contaminants...
Turns out it was the spindle drive. I lost a leg on the leads from drive. Called Siemens and got a manufactured one for $800.00 Removed old one replaced it and works fine.
Hello,
Has anyone ever tried to remove the glass tubes and inspect/replace the o-rings ? I'm getting a 4063 alarm when trying to bring the laser up and I'm suspecting an internal leak.
Thanks
Hello,
I have a slight problem, Machine has been working great until yesterday it had stopped cutting in middle of part. No alarms just feed hold button lit up. OT release will not move any axis and...
Machine was working fine until start up yesterday.... After enabling axis I tried to start spindle with a command, spindle turned about 5 degrees, stopped then a spindle timeout alarm occurred... On...
That is some great info, thanks !!! I'm gonna pull them off of the programming computer now so you can see what I have.
Thanks again !!
Hello
Thanks for the response !! Yes I do have the function key ( OPR/ALARM ) but not a soft key... However I do get a soft key after I press the function key ?? When there is an alarm i press the...
Hello
I have a Wasino WMC-3 Fanuc 0. Does anybody know what parameter to turn on to view alarms. Never a number just blank alarm screen with the LED lit up.... Any help would be greatly appreciated...
Hello
We have had this machine for 4 years now and from day 1 the turret looked ( clumsy ) while changing. About 2 years ago the turret started hanging up.... Now it gives no alarm, turret is not...
Thanks again ! Just submitted Quotes for the sizes we need !!
Anybody know of a set for sale ??? Ranging from .75" - 2.125" ???
Thanks
Thanks for the input ! Turns out I needed the door shut and in auto mode, NO single block. It will alarm out even if door is closed and in single block mode. Now it works great, Thanks !