http://www.cnczone.com/forums/attachment.php?attachmentid=334904&stc=1Busellato Jet 130
Has been sitting for 2 years since employee that knew how to run it left. Complete has everything with it...
Type: Posts; User: flhr97
http://www.cnczone.com/forums/attachment.php?attachmentid=334904&stc=1Busellato Jet 130
Has been sitting for 2 years since employee that knew how to run it left. Complete has everything with it...
I started out with a Taig mill and thoroughly enjoy it, but like a lot of people I wanted something bigger. I researched all the designs from here and other places and liked a lot of them. I wanted...
Some years ago I worked in a large shop and some of the guys would forget and leave the chuck keys in the lathes. After about the 3rd one I saw flying across the shop I decided to try and reduce...
The interface from the PC the Omron drives is the part I'm trying to figure out now. I have dc power supplies in the cabinet so the 24v is not a problem. Here's the inside of the cabinet....
I answered my own question today by calling Omron. FYI, according to them you can run your household 208 lines to two of the inputs on their drives and jump either of the two to the 3rd input on the...
I just bought this piece of equipment to modify into a cnc router. http://i50.photobucket.com/albums/f348/father_torque/2b0b_3.jpg
It was designed for 200v 3 phase input power, consequently the...
I know this sounds like a strange question, but here is my problem. I just bought a piece of equipment out of a factory to make a cnc router out of. It has all 3 axis and doesn't need much other...