I'd like to see what comes of this.
How a Y/N selection could be done without macro executor or FP.
Type: Posts; User: bill4807
I'd like to see what comes of this.
How a Y/N selection could be done without macro executor or FP.
I am not positive if 16iA is an option for high speed skip or not but you can use and configure just normal skip input X4.7 or other if they are not use by robodrill I/O.
I personally always use...
Yes i agree there should be CDs or manuals or something. But the customer does not have them. We will be doing mechanical work but i would like to do complete backups while they are at our shop.
If...
What manual would have these procedures in them? Operations manual, maintenance manual, instruction manual?
These machines are not coming with manuals the customer does not have them believe it or...
Hi All,
I am wondering the differences in a complete control backup between the OSP200/300 and LU300.
I have done backups on neither of these but have 1 of each coming into our shop and would...
As jim said don't use degrees, use pulses. The best way.
Or if you do not use an encoder you can add a tool pot count sensor. In addition to your tool pocket 1 sensor.
Then you use that count...
How are you inputting programs now?
If you are just selecting cutting programs you can create a macro program for part number selection. Use one macro to type part number as long it is numeric and...
Load it from boot screen. And override the original.
If you get a black screen with red error you have done something wrong.
That software when you compile it doesn't cover all of the issues with...
Did you get the original file from the OEM before you edited it?
No the product does not belong in that category.
If you do make a change from the UR you could look into area scanners/an area scanner to protect the robot zone instead of guarding. Depending on...
I agree with what you have said. They are cheaper than other brands.
Did you purchase the UR specifically for the collaborative environment? Or because your company thought it was a cheaper option...
I would like to test this for you, if you like.
Can you send the program to me?
I would rather not send a compiled file to anyone since it is somewhat proprietary.
Yes you can do it. We do it with 0i-MD controls.
I would have to look for parameters.
You want a comment to disllay in the macros page? Or you just want to declare variable names for use within...
They sometimes will if the remaining balance hasn't been paid.
What do you mean you lost inside the code?
Do you knkw how to use fanuc ladder 3? Can you see the ladder logic on the machine with just ladder monitor or have they blocked it out?
Yes Blum-Novatest normally does the installation and support of the software package.
The machine side PLC will need to be modified, so maybe find out if Blum where you are located can do this or...
Caron engineering sells adaptive control packages for this application.
They are expensive but can take CMM data and auto feed offsets and feeds and speeds.
If you do it yourself yes you most...
I agree with Dr.Dos.
They definitly spent some time developing this logic.i did find the position switches 1-8 and they get moved around upon certain machine conditions. It does look like they take...
Does your machine have the fanuc picture software option installed?
You can't load a faceplate of file without it.
The one that was defective from the previous post?
why would you disable it?
You need to know when the door is opened to accomplish what he is asking " to feed hold the machine"
DRDOS has it correct.
But can you back up the logic and send it...
V1000 has MA, MB and MC.
You use MB and MC for the normally closed.
Then when a fault occurs that contact will open,
You may need to format the CF card.
Well if hardinge cannot get you the SRAM then i believe you will be ok with reloading what files you have backed up. Can you list them, the ones you have?
What might work is You might need to...
what type of I/O board? A green open faced circuit board with a black 1 amp fuse?
You may have another fuse blown because the IO link should automatically reestablish comms when fixed.
Check io...
have you tried to load the parameters manually that they have provided you?
What files are you worried about not having, by needing the SRAM file?
Which batteries did you change?
APC are for the pulse coders. Also you could have a bad battery wire connection, check the voltage right at the servo amplifier.
You should look into fanuc focas. This is how other monitoring and gauging companies adapt offsets for tool length and tool wear and adjust feedrates and speed of the cut for maximum efficiency for...
hi,
Just wondering if anybody has a ladder backup of a mitsubishi M70/M700 or M80/M800 that i can take a look at?
The backup must be an individual file through ladder monitor..
Would be very...
hi,
Just wondering if anybody has a ladder backup of a mitsubishi M70/M700 or M80/M800 that i can take a look at?
The backup must be an individual file through ladder monitor..
Would be very...