Search:

hi guys, I know this is a old thread but I needed to replace the rear ball screw cover on a 2005 vintage TM1, got the kit from Haas and the single sheet of instructions, how do I get the rear bearing...

hi, just got a Colchester with a Fanuc 20T control, unfortunately the seller did not forward manuals, anyone have a quick start or quick program booklet or a link to download a fanuc manual? tried...

hi, just got a Colchester with a Fanuc 20T control, unfortunately the seller did not forward manuals, anyone have a quick start or quick program booklet or a link to download a manual? tried google...

did you have any sucess getting info, I have the same colchester cnc machine, no manuals, anyone got the power up sequence, it powers up, I jog the machine x and z to the marks, how do I set home,...

one other thing, what feedback should one see on the Haas and mastercam when doing dnc, should the computer give some feedback other than finished sending, does the Hass do anything other than the...

believe we have the null cable, we can send to machine but it send the full program not drip, the machine does run but when the memory is full it errors the Haas, we are using a laptop thro a usb to...

for a couple days Im trying to DNC into a Haas TM2, have tried just about every setting on the mastercam side, we are using X4, we have set the Hass control to DNC and set the baud, bit, xonxoff same...

for moulds we use the cam but to engrave on plates and cores for identifier the shop guys can engrave with the Haas, did get it working today, prety neat but for me no time saver

Hi Matt, mastercam is great and for me text is quick, Im more towards the opperator and shop workers, they are not at that level so a simple engraving on the mill would be a bonus compared to the way...

in this case I want to do quick text on tooling for identification, not a big deal for the fonts, if I want a more specific one my cad cam program will do that but then it takes a wile

we use mastercam but it is a powerfull package, prior to this we used bobcad and onecnc both worked well for cavity work

this z setting in g54 is great if you set all the tooling to a standard bar such as 10 inches long, all tools are set to this, now when you are setting the work on the table all you have to measure...

Hi Ken, I have had this machine for a few years and allways used the cad cam to generate text, saw a Hass mill some text and yes it was fast, it would be nice to know how it is done, I allways want...

Thanks Ken for the info, looked at it but not sure if it gives me the answers I require, the G47 is the key for engraving but not sure what to add for code, tried a program which seems to load but...

Good day everyone, I thank everyone who assisted with making a mould to produce a snow flake, if anyone wants the cad file let me know bit now I want to engrave on the part, Haas has a G47 code for...

Hi, little off the topic but where could I get a solid file for a skull that can be milled, I have looked around and to date have not found anything, I want to make a 3d skull and cast around it
...

did edit the pst file question 164, works great now, thanks for the information, by any chance anyone used mastercam X2, how much different is it to 9.1, are the way you draw and generate code similar

Thanks for the info, looked for the setting to turn off 4d, in configurtting, am I in the right setup areaation can not see this se

the one in mastercan works however it calls for the 4th axis to return home and gives a error, it is a paim when it calls for a tool change and the A comand shows up, maybe there is a way to edit the...

post a few pictures, I doubt anyone uses the old style verniers anymore they are electronic but hand tools are allways usefull

anyone got a post for v9 mastercam or even 8, the one I have calls the 4th axis and causes machine errors

Thanks

hi, anyone got a post for mastercam 9 for the tm1 Haas how do you remove the a entry after g28 at the end of the program when generating too paths

thanks for the info, what program can I open it with after extracting it,

Laurence

I have just purchased a Haas TM1 2003 model, as nice as it looks I would like to get it going, I have power and can home or zero the machine and thats it, I have looked on Haas website and called but...

Has anyone used mastercam 9.1 to send functions and files to a Fanuc 6M control, I am using the serial port, if I send a file in another cam software it works but only 700 lines of code so my issue...