They work fine. Using a 700 watt used ATX psu on my printer
Sent from my Lenovo S90-A using Tapatalk
Type: Posts; User: Metzindustries
They work fine. Using a 700 watt used ATX psu on my printer
Sent from my Lenovo S90-A using Tapatalk
Link broke. I'm using these cheap $3 led motorcycle lights on mine plus a 10 watt house led light in the enclosure
Sent from my Lenovo S90-A using Tapatalk
I have bought and installed several of the parallel boards that look just like this. They are a bit hit or miss, but cheap enough to buy a couple and if one doesn't work, I'm not worried.
Anyways...
One of thesehttps://uploads.tapatalk-cdn.com/20170514/7d20cefdc7c7e8d2a7ad8444910059ba.jpg
Sent from my Lenovo S90-A using Tapatalk
I see Aluminum has a 2% shrinkage but can't find details on 80%cu/20%al alloys for investment casting.
Sent from my Lenovo S90-A using Tapatalk
I am a complete noob at casting. I am looking at the China Jewelery foundry to use with my 3d printer and investment cast parts for my CNC machines.
Can someone tell me the approximate weight of...
And it's done.https://uploads.tapatalk-cdn.com/20170512/c6ab31d1c0d77ae44a6d34060c0dc71a.jpghttps://uploads.tapatalk-cdn.com/20170512/5cd9fbb2d0f1e6410560aa7c78bafbe5.jpg
Sent from my Lenovo S90-A...
It's done except for the cable carrier and fine tuning. Picture is my boy on the table vacuuming it off after machining plywood.
...
I already disassembled it. Needed my angle grinder. Basically it is similar to the knife grinding jigs though
Sent from my Lenovo S90-A using Tapatalk
More progress today.
To do:
Finish setting up mach3
Installing steppers on y axis.
Drilling and tapping set screws for the rack and pinion drive gears.
Installing power supply
Installing...
Other lessons learned, to get good smooth angle bar guides, I found a device that converts a angle grinder into a sort of mini chop saw. I used parts from that, roller bearings and 3d printed parts...
This is my second big DIY machine and my 12th router build.
Started out with laser cut and CNC bent 4mm ms plate. The shop across town has a Italian 3kw machine and a Japanese CNC bender. The...
I had that issue with a all in one China board. Turns out it was a defective board. They are a $38 item from China so when that issue pops up, I just get another board
Sent from my Lenovo S90-A...
Why is still a sticky thread?
I have seen this design for ages>
360010
However after using it on a couple of my DIY plywood machines for about a year, I was finding that the angle bar was not really good to hold the...
these are showing 92 ohms for the 800 watt heaters.
I have a 1.5kw air cooled china inverter spindle. SO far works great except that I really would like a spindle brake on it when I hit the emergency stop.
I see where they say there is a resistor...
Your options are:
-Good
-Cheap
-Fast
Pick two
Posted the files on Thingiverse.
Remix of Mini CNC In Sketchup and Designspark Mechanical CAD by largeformat3dprinter - Thingiverse
It is a remix of another design on thingiverse with the...
I had assumed people already seen the videos linked to in the other posts. It is just that there is such a lack of info online I put a shout out here.
I build my own printers and can get 50...
I got 3D printers and access to laser and water jet, however machining is getting pretty expensive for me. Lately I am needing some metal parts made and I am considering printing the part, and...
260374
I am working on a mini CNC router with drawings below.
One thing I am thinking about is the linear bearings.
I am either going to use 12mm smooth rod as shown in the rendering below or the...
Filament type: PLA and ABS
• Filament size: 1.75mm
• Speed: 320mm/s
• Resolution: 100 steps/mm
• Repeatability: better than 30 microns
• Minimum layer thickness: 100 microns
• Build volume:...
I have been using palm oil as cutting oil for drilling. I am looking at experimenting with a soap, water, weg oil mix and rice bran oil. Ricebran oil is 490f smoke point.
I have zero problems with USB and plasma. I use a hypertherm no high frequency start. Torchmate table. Super reliable
Lol. I'm going to the metal fabricators convention this week. I'll prob see something like that. I could slap the brand name Kondia on it.. Lol
http://www.kickstarter.com/projects/blueeaglelabs/kossel-clear-lets-build-a-full-sized-delta-3d-prin
Here us a Kossel 3D printer designed by a guy I know. It's the only self calibrating machine I...
I was machining some steel yesterday at less than 12ipm on a old Hartford machine. Even if I get someone with a shaper to make rack and pinion gearing its feasible.
My concern is someone...
I am in the CNC plasma business now. I have a Torchmate table. I am looking into expanding my shop capabilities, however cash is tight so I am looking at building additional machines making parts...