After lot of pain....job DONE.
All works, all buttons done.
When my hdd gone I reset BIOS.
I had to setup again EPP and works.
Thanks for help.
Type: Posts; User: lolos
After lot of pain....job DONE.
All works, all buttons done.
When my hdd gone I reset BIOS.
I had to setup again EPP and works.
Thanks for help.
Got it but I don't know how??????
My HDD gone I had to reinstall windows mach3 etc. I installed .053 version and works, buttons for movement are working spot on (set them as JOG ++/-- on the bottom...
No problem thanks a lot.
Got another video of my mill this time. Happening only when I am using the buttons UP/DOWN - Z axis and only in continuous MODE. STEP mode seems to be ok. Best thing - keyboard keys for X,Y works...
I am using LPT breakout board. There is 5 inputs and I am using 4 of them to make machine move. I have no idea what I am doing wrong. 4 inputs 4 triggers, no idea???
All checked, everything as should be. Button pressed - voltage, button released - no voltage. I have lathe and milling machine both made completely different way, one on smooth stepper, the other on...
.066 I have but I used to have older version, same issue.
I forgot to say, I have that runaway only when I am trying to use buttons, If I am using arrows on keyboard - all perfect.
Hi gays
I have a problem to setup buttons with mach3. I tried two different PC's and both the same (LPT ports).
I would like to use buttons for axis movement - X,Z. I set everything up but I have...
Yes the DRO is moving. mpg is connected to pins 10,11, axis select I have got on pin 12,13,15 (selector switch). To choose the axis I have the oem trigger set and
<tbody>
Select X for MPG 1
185
...
Unfortunately, smooth stepper out and still the same!!. No Idea why My next move I am taking all electronic into the bits.....Sad....
Thanks
I am not using spindle speed control at all.
I added external PSU 12V and 5V, There are USB ports on BOB's I cut usb cable in half and I used external supply... didn't help, still the same....
doesn't work
I have got LinuxCNC Mach3 Breakout Board - ijohnsen.com Info... BOB
II tried external supply - doesn't work, the same effect. Just one thing even I choose external supply for smooth stepper, there...
I already did that, didn't help. I think the smoothstepper is doing that. I am going to try get rid of it tmrw and then try it.
Hi gays I'am converting harrison mill to mach3 cnc.
I have problem with crazy axis movements. I crashed into the vice and bent int30 to er20 collect holder already. I'am bit scary now to do anything...
If I go for it ...is that code correct then?
"
net encA encoder.1.phase-A <= parport.1.pin-12-in
net encB encoder.1.phase-B <= parport.1.pin-11-in
net enc-counts encoder.1.counts =>...
Great You are a star thanks - works!!!! I have to play with ilowpass now.
I have got one more question
- Can I use 2 different mpg's for X and Z
cheers
Hi I am retrofit denford orac to linuxcnc/mach3. I have got mach3 fully working but I cannot handle linuxcnc. I am trying to add mpg into but I have some strange issue with it.
I have wrote the...
Hi guys
I bought china made breakout board LPT with charge pump module fitted but I dont know how to use it.
Link of ebay:...