Search:

Thanks for your reply I will have a look for them

Regards Neil

Hi all Could anyone advise me of what the differences are between mirrors and where the best place to buy them from. Also lens types . I need to get some spares.

Thanks in advance

HI all Can anyone give any info on what are the differences between the mirror materials. Where to purchase? Also how do I find out what lens is in my machine. No markings on it

It's a 80 watt...

Thanks for your messages where exactly did you order them from and how long did it take to come . Regards Neil

Hi anyone got any views on kehui machines

Many thanks

Hi all. The cw300 chiller advert says it will cope with up to 80w is this actually true or are they dreaming and anything bigger than 60w needs a bigger chiller . Thanks Again

Hi . Could anyone tell me what the difference is between Rd works and laser cut . Pro's and cons. We have been using Rd works but need to know if laser cut is as good, easier or more complicated to...

Thanks for all your comments. We have emailed them again and they have agreed to give us a full refund which is great news for us. We are now in the market for another machine.

Thanks again

Hi and thanks for reply . What issues did you have with your machine as you have changed everything?

We have lost all faith in this machine now after 4 PSUs. We have been assured that they have sold plenty of these JD3050 desktop machines with no problems and we must just be very unlucky but after...

Thank you for your reply I have spent a few hours testing the power setting to make sure they are the same as I always use and also done a test on a piece ok 5 mm perspex using 10 small circles, ...

Hi ,

We have a Chinese machine 40watt that we purchased from a midlands based company .

We have had the machine since May 16 , since we have had the machine we have had nothing but trouble...

Hi all.

Could someone please give me some advise. I have bought a Jd3050 40 watt laser from a local company. We have had numerous problems with the PSUs from one month of ownership. The...

Hi all . Could anyone tell me what the differences between the mirror types. Prose and cons

Regards Neil

Are there any engineers on here who know how to set these and willing to give me some advice so when they come I can make sure they are not fobbing me off . Regards Neil

I thought as much . Thanks for reply.

Hi all.

I am new to lasers and got a question about our new machine. We have had ours for just over a month. We were half way through a small engraving project when the laser stopped firing but...

Hi regarding the machine working and then the laser stopping firing half way through a job is the problem I had and it turned out to be the PSU was faulty

Hi all.

I am new to lasers and got a question about our new machine. We have had ours for just over a month. We were half way through a small engraving project when the laser stopped firing but...