Seems like you need to set your lead in/lead out correctly. Also dropping into a 1/4 hole with a 1/4 cutter makes it more difficult to get a nice ramping in ramping out.
Type: Posts; User: GCSRT
Seems like you need to set your lead in/lead out correctly. Also dropping into a 1/4 hole with a 1/4 cutter makes it more difficult to get a nice ramping in ramping out.
I would use 2 axis profile rough using ramp for the outside dia, and advanced z level finish for the inside angle, selecting only the angled surface. I am not an expert though.
I meant to the After Dark page...
Do you have a link to that? I can't find where to post...
Toolpath looks good, except the very outside contour that wipes out my whole part. How do you get rid of it?
Hell yeah dude!
Right click on "default chain start point" and pick "reverse direction"?
Or a 2D swept...
You need to program the center of your tool instead of the tip.
Thanks for the Quick Tip. Pretty sure my tool geo is correct. Here is a screen shot of what I get. The holder always says the same distance away from the tool. If I shorten the protrusion, the back...
Thanks! Check my post below.
Sounds like you have to window each drawing and use "save some" to save 28 different files and name them 1 thru 28? Then pull up each drawing seperate, fit all and print.
Hope this works!
Version 32, sorry...
So I made a custom tool and modified a tool holder. When I change the protrusion length, all it does is change the gap between the tool and holder. This won't work for collision checking. I am using...