Search:

Hi vph,

I only have one switch for each axis. I have home location set inside switch so I can manually move axis toward minimum and software will stop a homed axis before hitting a switch. If...

I don't know if this will help, but let me try. I have my limit switches inside my physical limits. And I have my soft limits inside my switch position.

My Y axis has a physical limit of >...

A different format in case wanted:

433038

I can offer you a quote. Please send me a PM.

See attached.

I use QCAD. QCAD.org

I'm sure others have their favorites...

This may be just a start - It'll need work. It may be no better than what you can do.. HTH

Maybe an upgrade didn't go as expected?

I can quote. Cannot PM you. Please PM me.

Thank you...

If there is code to wait for the ARC-OK signal, this may add the time you are seeing.

It's a start...

Hi Dave,

I have cut mostly 1.5mm and, like you already know, it cuts fine. I haven't had the opportunity to cut stainless as thick as 10mm, but I would try 3 or 4mm.

Good luck. I would be...

The stainless steel doesn't cut as "easy" as mild steel. It takes more force. I would run the torch a bit longer past the start point along the profile cut path or, at least, slow down the feed a...

We can offer a quote. Having problems sending you a private message. Please PM me your email address. Thank you.

Paul

I am certainly not the expert, but I have never heard of this. I assume you mean installed on a computer running Windows O/S. LinuxCNC needs a real time kernel and that is something Windows cannot...

I use the keyboard <Ctrl-HOME> to home all. How they home will depend on your config file. For instance, my Home-All will first Home Z (Z-Home is all the way up for me) and then X and Y will home...

I can't successfully open your Mastercam/DXF file. Just me?

This wolf scene in oval is a repost I had a request for:

Great! Sounds like they took care of you...

I do remember that when the second unit was being delivered, I asked the UPS driver to stick around until I opened it up. He said UPS rules say not to allow this, but he agreed. Maybe because of the...

Yeah - I think you're right. Contact them and go from there.

I called Hypertherm first and when they found out where I bought it from, she said I had to go through the local welding shop. I...

We must be similar. I, too, went through a similar situation when I got my Powermax: Packaged well, paid a decent amount of money (for me) and it came with a damaged side. I thought I should have an...

Here is another one. Still needs cleaned up, too.

Paul

Yeah - Seems something is up with Mach or a macro. I'm not a Mach user so I can't help. Sri.

If you are piercing at a measured 3.8mm, then I assume your torch can be programmed to go to 1.5mm for the cut. Would you be interested in posting a bit of your gcode to see what is asked of the...

I didn't notice what THC you are using. I would cut a few straight lines at an actual height of 1.5mm without the THC on and note the voltage. I would use that voltage reading for the THC. Changing...

Thanks for sharing. Very nice.
Paul

You're welcome, John.

Paul

Can you edit the line in your post processor to this:

post.Text (" M00 \"Check Position\"\n")

If I understand correctly, I think this should work.

Paul

I believe CE is for the European market and CSA is the Canadian safety standard.

HTH
Paul