Does anyone know where to get a 2.2kw 110v VFD for a 6090 4 axis router? I want to upgrade to a spindle that uses an ER16 or ER20 collet and it doesn't look like they make one for a 1.5kw 110...
Type: Posts; User: MadPickinSkills
Does anyone know where to get a 2.2kw 110v VFD for a 6090 4 axis router? I want to upgrade to a spindle that uses an ER16 or ER20 collet and it doesn't look like they make one for a 1.5kw 110...
Hey Guys
Thanks for the info to all that posted. With this info I was able to get my 6090 to move X,Y, and Z axis. I can get the spindle to operate manually, but I can't get it to run from Mach3. I...
if anyone is looking for usb drivers I think this is it
https://www.chinacnczone.com/en/usb-cnc-software-for-mini-cnc-router-machine-chinacnczone_l282_p16.html
Hello
I'm new to NX but experienced with Mastercam. I have a part that is shaped like a picture frame and I'd like to cut out the center material. I don't want to waste time hogging out all the...
lavrgs, about how much space did you need above the machine to get it out? I'm going to have my spindle rebuilt in about a month and mine is in the garage so I'm worried about not having enough room...
Here's my fix in case anyone else has the same problem. You have to edit the dynapath post processor. It's in your mastercam directory (C:\\mcamx\mill\posts\dynapath system_10_20...yadayada).
If...
What version of mastercam are you using?
There are no other programs in the controller.
I post the code with line numbers in increments of 10. When i look at the code after it has been loaded in the controller there is a new line number N155 E02$ that is not in the code on the cimco dnc...
So yesterday I loaded a program created in Mastercam. When I ran it, it made an unexpected X,Y move. When I looked at the code (dynapath conversational) I noticed there was a call for a different...
Hi all,
I've been using Mastercam X4 to create programs for my J325. I've been just using the out-of-the-box dynapath machine def and posting dynapath conversational code. I'd like the post output...
To send and recieve files you only need the #2, #3 and #7 pins, but to drip feed you need all of them in the diagram. Be sure you have the correct orientation. I have a couple backwards my first try....
Hello,
I was wondering if anyone knows a good supplier for ball screws. I have a Tree J325 and I'm looking to replace mine. The slop isn't too bad, about .0009 in the y-axis, I haven't checked the...
I have a J325 and mine uses the short, stubby one. Same as Fadal.
Thanks. I was going down the wrong path. I was thinking it was concourant program.
When I try to run it I get a "First character not N" error. The first line is
N10E01$
If I get rid of that...
Hi all,
I was wondering if anyone knows what the settings should be on a dnc program to send to a Tree J325 with a delta 20? I can send a program to the controller fine, but I'm not able to drip...
Nyco is also VERY expensive compaired to others.
ok thanks!
For whatever reason it works today. I noticed that on one of the boards in the dynapath rack, there was a red light on last night and it's not on today while its running. You can see the red light in...
Thanks for the reply. I overrode the cabinet safety switches so I could open the 2 cabinets with the power on. There seems to be full power getting to everything. All fans are spinning an lights are...
Here's the pinout from the Dynapath manual
Well I've run into my first problem with the j325. Today I went to turn it on and nothing happened at the controller. I could hear the normal noises coming from the back cabinet when I turned on the...
I got it figured out.
Mode Select -> Program (#3) -> "N." -> Enter -> Event Type -> M Function (#9) -> M03 -> Enter -> S500 -> Enter -> Cycle Start
Hello,
Thanks for the reply. I enter
Mode Select -> Program (#3 on the keypad)-> I type "N." and press the enter key-> then I type M3 S500->enter key
and I get a format error warning. When I...
Hi,
I was wondering if anyone has any examples of what the G-code should look like for the Delta20 control. What codes does it use for work offsets? What does the canned drill cycles look like. I...
Hello,
Is there a way to manual start the spindle on a J325? Is there a screen I can get to like an MDI type screen where I can input the codes and cycle start or is it something different?
...
Thanks for the help. Ya I re-read the instructions and I was doing it wrong. I was a little confused by the way it was stated I guess. Apparently you can move the axis while the screen is flashing,...
Hello all.
Well I finally got my phase adder hooked up and powered up my j325 for the first time today and it works! This was a big relief since I didnt know if it did. The monitor was inoperative...
Hello,
My 1990 J325 has a Delta 20 controller. Not sure which ones they put the 10's on. All the ones I've seen (not many) have 20's. Mine does have EIA g-code capability as well as the Dynapath...
Hello all,
I recently bought an old J325 with a Dynapath Delta 20 controller in need of repair. The monitor was not working so I pulled the assembly out of the controller and noticed a label with...