So You have a 5.5 W module as well?
Skickat från min SM-G390F via Tapatalk
Type: Posts; User: LH4PI
So You have a 5.5 W module as well?
Skickat från min SM-G390F via Tapatalk
Depending of the laser power module value you need to have an external power supply added to the laser control card , but I assume you have figured that out now and have the laser working by now ?...
Hi Glass3Cat
I have added a 3 d cad model of 3108 and a 5 axis version 3018AB of the same base model made myself and with help of grblgru we have added a simplified model of these two models...
@GrblGru
Thanks for answering
I understand your point to not be to details of a certain hardware , and instead concentrate on the overall picture . My point to read more than one command...
@RgblGru
Sorry
it seems like;
the stock box is functionally , but I only use a 2D engaver G-code so of courcea I couldn't see a box
It seem that the 2D scaling of dxf files etc is...
@GrblGru
Thanks for the fix 3.44.11. I was able to get cnc 1310 machine model to be expanded to the size of 3018 ( even if your comments in #279 is valid)
"
I test to engrave my logo "LH4PI" ...
@GrblGru
Some additional info
I check all 3-axes machines with moving working tables instead of have the table stationary in the y-direction . I find beside the cnc1310 , also the ...
@GrblGru
sorry the images from my last message was not uploaded correctly
@GrblGru
Your software is very good , and I learn still a lot!
I have struggled a lot to understand and set up correct limits for the 3018 machines based on the 1310 model that exist , but...
@GrblGru
Thanks , I tested the the new beta version V3.44.9 for you.
With this version it was possible to extend the dimensions in X and Y direction.
In the machine manager you will find the...
@GrblGru
I now have calibrated my A and B-axes and I have A short question:
Is it a known error in the support of the B axes $114 command ? . The B-axes moves , but I can not change the...
Thanks, I found suitable 3d files for the collet,
Thanks GrblGru
A few more info;
A.
I have decided to make a model of my 4-5 axis Isel machine (see picture) I have already been able to make a 3D model of the Isel 4030, the two axis ISEL...
Dear GrblGuru
I apologise that my earlier message about not be able to save the project files was related to the beta version 3.44.6 only , for the release version 3.44 it was ok .
Thanks so much for the manual, it have help me a lot to get started .
One thing that was need to be able to run the communication with the arduino Mega 2560 board to avoid "Alarm2" and error 15...