The z adjust belt on my shenhui sh-350 laser has cracked and needs to be replaced. Does anyone here have the specs for it and a source vendor? Any information is appreciated. I messaged shenhui...
Type: Posts; User: scatman
The z adjust belt on my shenhui sh-350 laser has cracked and needs to be replaced. Does anyone here have the specs for it and a source vendor? Any information is appreciated. I messaged shenhui...
I use these type of visual indicators: one on the loop through the laser tube, and one on the loop from my chiller to the storage tank. ...
I find that keeping the optics clean makes a huge difference in cutting ability. Also, focus is pretty critical. With freshly cleaned optics I am cutting at 20mm/s and 75% power, but that is for 3mm...
I use CorelDraw X5 with Lasermate 5 or Laserworks 6. The Corel software uses a plug-in to bring the image into the Lasermate / Laserworks where the actual engraving / cutting is done. I used the...
What type and thickness is the wood you are trying to cut? Also, what speed and power?
I can fit a piece about 24 inches wide in. I can give you exact measurements if you need them tonight when I get home. Pm me if you need that.
I have one. I am pleased with it. I have compared it to my friend's Redsail 700 and it is very comparable, except of course, for the smaller bed size. I do recommend getting a chiller for it...
Not exactly what you're asking for, but have you tried the version 6.0.44 downloaded from "http://en.rd-acs.com/down.aspx "?
I had to replace the controller on mine. I got the best price from Shenhui. I just contacted them through their Facebook page. The 350 is my first laser but I am very happy with it.
Corel Draw Home and Student edition does not allow macros so you cannot use it for the laser plug-in (at least for X6). Didn't find that out until after purchase unfortunately.