Search:

The title "extorsion" surprises me. If machines shops like to stock all the raw materials and share among other machine shops, then actually the material cost will be even more higher. Metal dealers...

Inconel-718 can be very challenging to drill due to the high nickel content.

If the material is in aged condition- AMS 5663, it will be even more difficult.

If the part permits, you can...

The axis movement can be set by EXE-service-axis parameter settings.

But why do you like to limit the movement? The error may be due to dried grease in the slides, rusty slides. Have you tried to...

If you are still sourcing, we can supply your Ti rod. We do have ex-stock.


Daniel Woo

Marketing Executive.

Titan Engineering Pte Ltd
Blk 20 Woodlands Link #08-36
...

Have you sourced these fasteners? We could help you. These fasteners looks like automobile fasteners.

www.titanengg.com.sg

Working with titanium is not very difficult. If is CP grade titanium, then it is cake walk.
If it is Titanium alloy, then you need to have some strategy before cutting it as it will work harden very...

Yes, it is possible.

Few months before we have changed CRT to new LCD. If you want to confirm, just plug the cable into the LCD to see whether it is accepting it or not.

As a word of caution,...

Just wondering whether you will quote for the following terms.

1. First time customer, big global company with global procurement.
2. The machining job dimensions can be said as difficult to...

Interesting. Till now there is no short-cut method to quote for machining parts. It really requires years of experience to know the processes involved to make any parts before quoting. Ofcourse we do...

In our shop, cleaning the filters are generally not practised as it can be done only few times and the re-use life is not that big to compensate the cleaning time and charges.

You really clean...

Historically, titanium has been perceived as a material that is difficult to machine. Due to titanium’s growing acceptance in many industries, along with the experience gained by progressive...

Tool marks can't be totally avoided in moulding. Expect that and face it with further polishing. If you use high speed machining, tool marks can be virtually polished within 10 microns. It takes...

For complex mould making uses, nothing beats Unigraphics.

Pros: Good results with 3D- faces
Cons: expensive and takes time to learn.

http://www.titanengg.com.sg

For the CAM softwares, the prices depends on your application, like whether you mostly need 3D or 2D, whether you need the software for your design as well, whether you need any customisation. These...

In Unigraphics there are two ways to do it.
1. keep the original electrode model, use two set of programs each one for roughing & finishing electrodes. Here you can play with the tool diameters...

CT tech is perfect.

I had the same prob, the machine will stop during operation saying the door is open. My friend sugested to check the wire points above the doors and bingo, just shake a bit,...

http://www.titanengg.com.sg

Hi John,

Have you found your Ti fastener vendor?

We can supply your fasteners either in ex-stock or custom made.


Titan Engineering
http://www.titanengg.com.sg

Basically, Titanium is hard to machine metal, and if your customer doesn't knows or don't want to know this, your position is bit tough.

In our part of the world there goes a saying, The cutomers...

Hi, Machining Titanium is a bit tricky job. If possible, go for wire-edm. Or follow good-ole tips. Sharp tools, not too light cuts & rigid clamping.

Titan Engineering
http://www.titanengg.com.sg

http://www.titanengg.com.sg

Many of titanium’s material and component design characteristics make it expensive to machine. A considerable amount of stock must be removed from primary forms such as forgings, plates, bars, etc....