Search:

Here is a photo of my spindle, hard to say if it's accurate or not as it says 2.2kw and 1.5kw

499074

Hello,

I currently have my Huanyang HY01D523B and G-Penny Air cooled 1.5kw /18k RPM - 220v spindle combo working via RS-485. The problem I have is that with these settings, I can run my spindle...

Anyone in here have a FluidNC Post Processor for CamBam?

Ok I'm back to the 1.5kw combo from G-Penny as the 2.2kw with a 30amp circute would cost me to much to put in.

https://www.aliexpress.com/item/1005002502639247.html

The VFD is listed as 6.5amp...

It's pretty easy for me to add 240v and will be doing it for my tables. So if the 120v spindle is that horrible I might as well go 240v :)

Would I be better off with a 2.2kw combo or stick to the...

I'm currently in the process of putting together a QueenBee after being away for ~10 year with a DIY wood CNC. At that time I was running a Bosch Colt 1HP trim router.

This time arround I would...

dont make a personal order, sent it to your work and it will go true :)

i make a few orders a year and send it to work.

Are you sure it's lexan (polycarbonate) and not plexyglass (methyl methacrylate)

Lexan is almost imposible to break!

There are alot of video on youtube :)

Cool thanks everyone!

I have a Taig on the way with a G540 and 166oz steppers.

Should be here this week!

Make sure you have done the Mach3 optimization
http://www.machsupport.com/downloads/XP_Optimization.txt

Can you give me more info on what you are using?

Hello,

Is anyone running a 2019CR-ER with the 166oz Probotix kit? Jeff from (http://www.cnczone.com/forums/taig_mills_lathes/106971-stepper_motor_taig_cnc_mill.html) seems to thinks 1660oz is the...

hello,

I'm in the process of setting up a small Taig. Anyone have any feedback on this setup:


4 axis CNC stepper motor driver board 3A V6560 Mach 3 | eBay

Thanks

Hello,

I'm looking at setting up a small cnc mill for jewelry. I have been reading up on a few machines but would like to hear from some one that has one of these machine all setup. I plan on...

heheh ya i just found it thanks :c)

where couls I find more info on Gmax?? I google a bit but it looks like the software was owned by Autocad and they stoped develping it a few years ago.... And I could not find any info on your link...

yes I do, I'm running there 260 and a 280 with the rest of there controler and I am very pleased with it.... Chris and Len are both really helpfull... but not sure waht no responce. I talked to Chris...

what kind/size of machine are you building?? this is really important before making the choice....

I just added a small video of my cnc in action for anyone interested:c)

http://www.charetx2.com/_cnc/

I know the motor are small but they where already ordered when I started my machine... they are powered by a 24vdc/6.5A powersupply. I will be upgrading these on the first chance I get.

I cut...

hehhe yes it's even on wheel :c)

I was home at luch and I think I manages to square it up... man I have so much to learn :c)

ha ok that is good to know but then I still have the same problem, how could I make sure that both of my switch are equal???

ha thanks guys, this is all good info :c) I don’t have homing switches yet as I didn’t not really how to align the ends of my 2 rails on my Y, plus I wanted to have a touch probe and would not have...

yes it is... what would be the easiest way to square it out?? I just used my 30 year old carpenter (was my grandfather) square to square it up... I know I can use the 3,4,5 rule but it won’t be...

Hello guys,
I just terminated my Joes hybrid look alike. This is my first built and it when fairly smoothly.

I ran my first part tonight, I was pretty excited event dough it did not come out as...

http://www.cnconabudget.com/PaulJonesZAxis.html

What software are you using?? if you are in Mach3, look under "Config > Slave Axis"

I just ordered 3 rod from mcmaster and im in NB, this is my 3rd order from them. no problem getting it shipped....

How far are you guys from the border? If so you could have it shipped to the True...

Fredericton, NB, Canada