584,805 active members*
5,302 visitors online*
Register for free
Login

Search:

Type: Posts; User: memoryman

Page 1 of 17 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: Fanuc 15M9A - PMC / PARAMETER RELOAD / IPL-Mode / Error

    This looks good.
    "What is determined by the PMC parameters?" the variables used in the ladder: timers ,data tables, counters, keeprelays.
    You can contact me directly at [email protected]
  2. Re: Fanuc 15M9A - PMC / PARAMETER RELOAD / IPL-Mode / Error

    That is the ladder: it is not lost when you lose the volatile data. You also need the NC parameters and the PMC parameters.
  3. Re: Fanuc 15M9A - PMC / PARAMETER RELOAD / IPL-Mode / Error

    What is the machine model?
    You have the NC parameters? I can only help loading parameters, NOT create them.
  4. Re: Fanuc 15-MA How to Punch 8000 / 9000 Programs

    Make sure that for programs 9000, parameter 2201 bit0 is set to "0"
    and for programs 8000, parameter 11 bit0 is set to "0"
  5. Re: Troubling FANUC IPL question - how to enable G10 without resetting all memory on

    The procedure or the 11 is not the same as the 15.
    "Supposedly at the end of the procedure it asks to clear the files (saw it on YT video) and this bit worries me." It will clear only what is...
  6. Re: Troubling FANUC IPL question - how to enable G10 without resetting all memory on

    In IPL mode you can enter the options in hex; likely you won't lose any data by only enabling G10. Do you know how to do this?
  7. Replies
    9
    Views
    531

    Re: Fanuc SRAM Backup Stuck

    Also available from [email protected] (I supplied the 'empty' files to Memex...)
  8. Replies
    9
    Views
    531

    Re: Fanuc SRAM Backup Stuck

    But it should indicate completion of backup regardless.
  9. Replies
    9
    Views
    531

    Re: Fanuc SRAM Backup Stuck

    All parameters and other data, other than part programs, are stored in the first file. Only if the first 512k of sram is insufficient, will additional files have programs in them. So, don't be too...
  10. Replies
    10
    Views
    269

    Re: Fanuc 0M-C enable macro B issue

    0453 - 03 is the software. My option list shows that 0453 does not support macro B.
  11. Replies
    10
    Views
    269

    Re: Fanuc 0M-C enable macro B issue

    What is your software? You may not have the eproms for the macro B option.
  12. Replies
    10
    Views
    269

    Re: Fanuc 0M-C enable macro B issue

    Are you leaving the other bits (x) unchanged?
    902-x1xxxxxx macro A
    917-xxx1xxxx macro variables 600
    912-1xxxxxxx macro executer
    913-1xxxxxxx macro B
  13. Replies
    10
    Views
    269

    Re: Fanuc 0M-C enable macro B issue

    p/s 000 alarm means that the control power has to be cycled.
  14. Re: How download parameters FANUC-18T via RS232

    If the SRAM backup in BOOT mode results in a parity error, you will likely also get that when downloading the programs. Try deleting the offending program and then do the SRAM backup.
  15. Re: Fanuc 11m Keyboard certain buttons not working

    one 'stuck' key will affect other keys. A bad keyboard is likely the problem.
  16. Re: Reading axis position and tool offsets by an external PLC

    I need to have much more info before I can suggest a solution; it CAN be done in real time, if needed, but it may be too expensive.
  17. Replies
    19
    Views
    3,327

    Re: external devices connected to a CNC machine

    That is an interesting 'problem'. I don't know what the maximum latency of MTconnnect on a 30i is, but I suspect a lot less than 10s.
    A possible solution is using I/O Link (I did that before).
    I am...
  18. Re: Reading axis position and tool offsets by an external PLC

    That is an interesting 'problem'. I don't know what the maximum latency of MTconnnect on a 30i is, but I suspect a lot less than 10s.
    A possible solution is using I/O Link (I did that before).
    I am...
  19. Replies
    4
    Views
    527

    Re: Fanuc Controller board blowing fuse

    Remove it; don't bother replacing it.
  20. Re: Urgent help needed, PLEASE Fanuc 21i Model A

    You will have lost your PMC parameters; they have to be restored. There may be other issues.
  21. Re: Urgent help needed, PLEASE Fanuc 21i Model A

    Is your ladder running?
  22. Replies
    6
    Views
    832

    Re: Enabling 4TH axis with Fanac Om-C

    Download the NC parameters, including the 900s and send them to me [email protected]
  23. Re: Urgent help needed, PLEASE Fanuc 21i Model A

    If you have a SRAM backup, use that to restore your data.
  24. Re: Lost my parameters a while ago, now I cant use G10 parameter write

    That is an option parameter. Send me a p.m.
  25. documentation needed for Heian NC-432 and NC-442 twin table routers with Fanuc 15MA .

    I have been working on Heian NC-432 and NC-442 twin table routers with Fanuc 15MA control. The customer's documentation is incomplete and Heian is no help. Who has one or both of these machines and...
  26. Thread: FAPT LADDER

    by memoryman
    Replies
    0
    Views
    450

    Re: FAPT LADDER

    Did you back up the LADDER separately? It also depends on the FAPT version; which one do you have?
  27. Replies
    2
    Views
    596

    Re: Fanuc O-MD 0905 parameter locked

    You may need to use a password; I am not allowed to post that info here, so email me: [email protected]
  28. Thread: Fanuc 15M9A

    by memoryman
    Replies
    1
    Views
    449

    Re: Fanuc 15M9A

    Do you have a complete backup of the NC and PMC parameters? Also programs, offsets, custom macro variables?
    Where are you located?
  29. Re: Fanuc PSU A16B-1212-0110/XYZ, are XYZ numbers important

    I have never had a problem with a different version; you certainly can use a higher (later) version number.
  30. Re: Power suply FANUC O-T A16B-1212-0100/08A

    You can buy one off Ebay for ~$150 shipped; just replace it.
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4