If fresh to the topic or if in the know perhaps you can help.
My set up: A controller is connected to Mach3, with the correct pins configured and when the calibrating plate touches the tool the...
Type: Posts; User: Flintstone
If fresh to the topic or if in the know perhaps you can help.
My set up: A controller is connected to Mach3, with the correct pins configured and when the calibrating plate touches the tool the...
Thanks slopecarver! Nothing is difficult for the one who know for all others the CNC conversion world if you come from the outside is vast and unknown.
Thanks Zool! I did not visit the forum to see your wise words :) The machine is now converted, but it did cost a lot. Galil controller and new servo drivers from a company in Bulgaria
Thanks...
Old CNC Bulleri Router in need of modern control
I bought Bulleri Model 644NC3D CNC Wood Router made in 1986 and are not able to get it going. There is no documentation and although it may be in...
Soprel Transdriver PWMM 110x8/16
Further update
I managed to get X and Z moving which was great!
There was still a problem on Y. In my attempt to verify the operation of Y I swapped the...
Here is a short update: the controller is NUM Power 1020 and I have managed to get to move the X and Z to home position. I swapped the X and Y drivers and managed to mess up the counter on X wile...
Hello All
I got a Bulleri 644NC3D Wood Router and need to get it going, but as the machine is over 20 years old there is no info of any sort.
Any help will be appreciated
210952
210954