Search:

I am new to horizontals so I don't know the proper procedure to set work offsets. Or how Okuma wants you to do it.
The machine is a MX-50HB with a OSP-U100

I tries the set button, the calculate...

Is this what you are referring to?

Hi, I'm trying to align the tool changer of a MX-50HB. And I keep getting this alarm. 3705 ALARM C ATC system condition C40. And the diagnose page is no help. But the help page for the alarm it says...

I have an LB10 and an LB15. The LB10 has had the RS232 working for quite some time and I can put programs on and pull off the programs with ease. It took me a while to get the right settings on the...

I have a MX-50HB it has the 100 tool belt. Two belts each hold 50 tools with the rabbit from the tool ready pot to the belts. I need to align it. I have never seen this machine do a tool change and...

I am helping a friend fix a SL-253 with a MSG-501 control.

The first thing you notice is the colors shift and fade in and out when doing nothing. Then when scrolling thru a program sometimes the...

I figured out what the problem was. The "083" in the error code just didn't make sense. But I thought I should look, in the macro file. And behold there is a "083".

Original snippet of the file...

In MDI I typed "CALL OPROBE" it gave me 2218 Alarm B Program bad direct: program name 2
"CALL OPRBE" gave me 2221 Alarm B Subprogram: program name 2
"CALL PROBE.SSB" gave me 2222 alarm B mnemonic...

I tried "CALL OPROBE" "CALL PROBE.SSB" "CALL OPRBE".
All of them gave me error.

I think it is worth the memory space. At least for the moment.

Thanks for the help

I want to call it with a G code. I have G120 set to OPRBE. And the file which this time I think I attached, i had to change the file extension form .SSB to .txt to upload it. Then I tried to register...

I miss explained. I got this machine last year and I am just getting around to use the probing on it. I bought a probe from an auction. There is only the one probing macro file that I have, which is...

Hello all,

I am trying to register a library program on a OSP 700 control that is on a MX45VAE. The macro is for a spindle probe. I was able to set the buffer size. But when I put in the "LP...

Hi All,

I am trying to get more memory on a Okuma MX-45VAE mill with a OSP-700 control.

I have seen this post.
https://en.industryarena.com/forum/memory-upgrade-options--367932.html
Where a...

Thanks for replying. I put in the sequence number in and pushed APC reverses and it sent it to the right place.
Also it turns out the riggers attached some of the wires in the control box...

I recently got a Okuma MX-45VAE with a OSP700M control from an auction. I got one of the board fixed, added new oil, then moved the axes. Then I tried the pallet changer out in manual mode. I got the...