Search:

BigC48 might be an idea to email Citizen Machinery UK as you never know they might have new old stock. They've been around since the 80s that I know of so would have worked on your machine model from...

BigC48 are you UK based? Have you thought about contacting Citizen Machinery UK in Bushey?

Thanks for the response zavateandu. Would you believe it though, I powered the machine off and on again without doing anything else and the servo alarm has disappeared

Any suggestions on how to fix this C-Axis 414 servo alarm?

I can't answer your specific question but have you tried using G50S???? (???? = the max spindle speed you want) in your program?

No I have not resolved the issue

@servtech can you offer any help on this topic https://www.cnczone.com/forums/mitsubishi-controls/435600-mitsubishi-m64-issue-start.html

I've been having an on going issue starting the machine and it seems to be getting worse. I have to turn the machine on and off until the Mitsubishi control loads up. See the pictures below. Anyone...

Now that I'm able to punch from the machine I thought I'd get a parameter back up. I've managed to punch the parameters from 000 to 0731 using P-9999 but parameters 1000 to 3127 have not been...

So I've managed to get the machine to punch programs now. I changed the A16B-1200-0310/02A board. I'm going to send the old board away and get the output data chip changed so that I'll have a spare...

Many thanks for the confirmation

As a result of a RS232 program punch issue here https://www.cnczone.com/forums/fanuc/435364-forum.html I've been manually recording my machine parameters and noticed a couple of discrepancies.
What...

Just to update, in the above I should've said the line sending chip SN75188 was the likely culprit.

Anyway, I've been playing around with an RS232 mini tester so does this help anyone confirm...

I currently have a problem getting the parameters from my machine https://www.cnczone.com/forums/fanuc/435364-forum.html and I don't have a backup :( Once I get my problem resloved I'm more then...

I'm after some help and advice regarding an RS232 problem.

Machine is a vertical milling machine Shizuoka B-3V with Fanuc 6M control.

RS232 has been working fine with no issues for years using...