Josh,
Are you still available???
Let me know
[email protected]
214-828-4149
Gamy R.
Type: Posts; User: gamaffair
Josh,
Are you still available???
Let me know
[email protected]
214-828-4149
Gamy R.
One more thing,,, in the diagnostics the bits do not change back and forth indicating that one or the other have even actuated...
John,
We ckd clamp/unclamp solenoids. Resistance equals 24 ohms on both, measuring same as on all other solenoids.
The signal LEDs however do not indicate that either solenoids are on.
Shortly...
John, Is there a # where my tech can reach you at?
Gamy R
Hi John,
No the cylinder is not moving at all. These also seems to be a beeping noise coming our from behind the turret... I have scheduled a cnc tech to come by next week but any input helps.
...
Hi John,
All of the other hydraulics are operating properly.
Gamy
Hi John,
Control is Seicos (LMulti) and the tool holders are KV40. What appears to be happening is that the cylinder that locate behind the turret is not engaging on to the back of the tool holder...
Hi All,
I have a Hitachi Seiki Hitec Turn 25M that we do not use often. I used it for the first time in a couple of months last week. Everything seemed to be ok with it until this AM. I was in the...
"Underthetire"... Thanks for the post. We cleaned out the water return box & hose and the problem was fixed...
Gamy R.
Thanks Matt,
I hope that this is not the issue... We might have to contact the mechanic if plugging the spindle hole does not help...
Sounds like it could be happening... I am machining smaller parts where the coolant is almost shooting into the spindle hole... I will try to temporarily plub is with a sponge or something to see if...
Why is there coolant water in my Hydraulic Main Tank??? I noticed last week that my coolant water kept getting low too quickly. As I looked for the water leak I noticed that my Hydraulic Oil Tank was...