Hi Zavateandu,
Are you willing to share the parameters for the lathe Takisawa TM15?
thank you very much in advance.
Type: Posts; User: vladimir1409
Hi Zavateandu,
Are you willing to share the parameters for the lathe Takisawa TM15?
thank you very much in advance.
Hi!
We have a big problem on a machine HITACHI SEIKI VM40 with SEICOS M2 control, year 1988, SN No:40309,
the machine was working just fine until the battery alarm appeared on the screen 033...
Hi!
We have a big problem on a machine HITACHI SEIKI VM40 with SEICOS M2 control, year 1988, SN No:40309,
the machine was working just fine until the battery alarm appeared on the screen 033...
We are desperate, we don't have manuals or any experience with this machine and control so any suggestion is more then welcome...
Ok we manage to go through the procedure, but now we turn on the machine we get Z80 CPU ALARM on the screen any suggestions how to continue from here?!?!
Hi!
We have a big problem on a machine HITACHI SEIKI VM40 with SEICOS M2 control, year 1988,
the machine was working just fine until the battery alarm appeared on the screen 033 BATTERY ALARM...
yes, the machine is working just fine.
Hi all,
guys, please help the Fagor control and winDNC are new to me and I cant get them to work,
I have a rs232 and Ethernet communication on the machine, I am only trying to send a program form...
Hi,
we just bought a MICROCUT machine RIC-MC 600L with fagor 8055i control, and we got this two alarms
CNC: 2000 External emergency activated
PLC: 0030 (TOOL COUNTER ERROR)
we think that...
drdos; thank you for the reply i think I have the 4th axis option, I also have the servo drive and all the cables for the 4th (A) axis up to motor and encoder connector built in the machines cabinet,...
thank you tc429, we will check closely for trace corrosion and will do ohm inspection as much as we can do, but while we do that just interested in the suggestion of CroCole:
"Does your machine have...
CroCole; Yes I have a 4th axis output on A16B-2200-0360/03B card and I don't use it, I tried your suggestion but I keep getting alarms,
I also tried different combinations no luck again, this is...
the servo drives were the first thing among everything that we swap I wrote in the first post, and the vibration stayed on the X axis,
thanks for the reply
thank you for the reply
tc429 we tried that with the parameter 8121 to 0 the vibrations are still there,
we check even before the coupling and the center bolt of the encoder and we check again...
there is no alarm the machine can work like this for hours,
and about the parameters we tried a lot of combinations and all we got is small differences even with drastic changing values
but the...
Thank you for your reply,
Problem existing even the motor is disconnected from ball screw. So any mechanical problem is out off any discussions for problem. We supposed that the problem is in CNC...
the motor is:
AC servo motor model 5S
type A06B-0314-B032
we also check the motor and encoder cables on problem there also.
Hi all,
the machine is Mori Seiki MV40V with Fanuc 0M-C control, 1990year,
few days ago we got some kind of vibration on the X axis,
the vibrations are with constant period along the whole...
Al I am not at work today but I will check the pattern and give you a feed back on the status.
tc429 yes it does have the little atc control panel on the side, but I am not sure that it has the...
I checked the voltages on the both power modules(PCB and I/O unit) on the check point CP17
all voltages are ok in +/-2%
when I ask about the address number for diagnostics I meant on
STATUS NO...
thank you for the reply Al
could you please tell me what is the address number in the diagnostics for the switch selector,
I don't have all the documentation for this machine
hi all
the machine is hitachi seiki VA-55 with fanuc system 11M,
after the machine was turn off correctly, the next morning when I turn on the machine started up
there is no alarm or error but...
problem solved it was the tool clamp sensor ;)
thank you all
hi
the machine is VMC Victor V center 4 with Fanuc 10M,
there was a power failure while the machine was on and working, after the power got back I turn on the machine a everything look ok until...
start a new thread maybe someone can help you.
I tried the same thing on my machine to fix the ATC but no success so I am still changing my tools by hand...
wish you the best of luck
hey Dan
I am interested in the No.1 solution for drip feed on fanuc 6m, could you please explain more closely about the "direct connect" BTR cable and what are the additional settings to fake out...
what is the serial number of your machine, the SN is on the plate on the power cabinet, mine is NK - 1142
is the servo on the z-axis same as the servos for the x and y?
if it is the same try swat the servo of the z axis with servo from x or y axis.
if the same servo alarms then you definitely have a...
is it possible that a machine with fanuc O-M cotrol 1990y won't be able to work in DNC(drep feed) mode?
I ask this because on the control panel there is not a TAPE mode,
there is only:
EDIT...
it is definitely CAT I have the same arm on my machine.
the taper on my machine also has some small cracks but it runs just fine so try it first like it is, and then if it damaged a lot, than...