After two years of searching, I found a part list from FF-510 :) I can not put it in the public domain, if someone needs it, write to me.
Type: Posts; User: Milling_man
After two years of searching, I found a part list from FF-510 :) I can not put it in the public domain, if someone needs it, write to me.
So guys, maybe today anybody can find documentation of this machine?
Hello. I will continue the story of my experiments to deceive reality
Last week I completed the optical tube, and together with our technologist, we adjusted the diamond inserts on the face mill. I...
I'm not sure that everything can be done as cool as you want (pc-232), but something can be done.
What do you want from the machine - a full 4th axis controlled by G-code, or an index 4th axis,...
It would be nice if you attached a drawing or photo of your details. From the verbal description it is difficult to understand what exactly your problem is.
As for meters of this type, I have worked...
Hello.
Lately, I've been working on this problem a little. Fortunately, my problems are complete nonsense compared to the problems of people in a neighboring country ....
On the advice of a...
Send me your email and I'll send you the files you need.
Sorry, I wrote the wrong word. Of course, it should have been said insert, not plate.
Now we have almost switched to Chinese PCD inserts at $20/piece, but perhaps with an increase in the level of...
Ok, I asked my friend, I'm waiting for an answer.
Thanks, I didn't even think about the optical sight finder. Alas, the working distance of my probes is also not large, a maximum of 20mm.
I am attaching a document from MAPAL to the message.
Believe me, contact methods will not work here. I tried to use them many times in the last 7 years. This always led to damage to the plates...
Of course, not every touch on the plate causes it to chip. But any movement on the plate of something harder than plastic in a direction other than the worker leads to chipping. We have already tried...
If it was acceptable to leave one plate, we would have already done it :) It's very slow. For the same reason, we use diamond inserts rather than carbide inserts. In addition, why reduce the speed of...
Hello colleagues.
In our work, we use face mills with diamond inserts. These cutters are individually adjustable for each tooth so that they all have the same height. The tolerance of even the most...
You are right, there was a slight confusion in terminology. But I still doubt very much that it is possible to make an accurate spindle body in one day :) Only artificial aging (exposure in an oven...
It's hard for me to agree with you. If we talk about a quality spindle (not a motor spindle), there are dozens of operations in its manufacture. Only all operations of thermoreversal will take much...
Our situation is exactly the opposite - a two-stage vacuum pump works great when cutting plastic (POM), using a coolant. We used to change the oil about once a week of continuous operation, but the...
I see that you are serious about doing this :) It's cool. Don't be afraid that you can't order a million dollar spindle to be made, as I said, I've seen examples of fast spindles being made literally...
It is best for you to post a macro here, just copy it into a message.
If you mean the program looks something like this:
M79
G28 Z0
then there is nothing surprising in the fact that it freezes -...
It looks like you forgot to attach the program :)
From your message, I understood that the M79 code is an unclamp tool. Then why do you think he should change instrument? Or does this code fail and...
Making a spindle yourself is a rather difficult task. I'm not saying it's impossible (even if you don't have the right machines), but it will either take a lot of money or a lot of time. I've seen...
I have had many problems on a surface grinder where the power to the frequency converter was suddenly cut off. I turned it on in this mode, hoping for a power reserve, but in the end it just burned...
What exactly is your problem?
Does the wheel stop cutting metal very quickly? Maybe microcracks appear on the part? Different problems may have different solutions :)
Do you have documentation for the car? There is usually a list of errors, and their brief description.
Hello dear colleagues.
Maybe there are owners of milling machines Mazak FF-660 or FF-510?
I'm looking for documentation on its mechanical part. I have a master ledger with diagrams for hydraulics,...
Have you bought a new machine or a used one? We had a similar problem with the new VCS-530 in 2017 due to the Chinese New Year. But, it lasted about a week, not a month ...
I have ideas on how to...
I attach a photo of the instructions with the pinout of the connectors.
Is this question still relevant to you?
I have a friend who is very familiar with connecting these amps. I can ask him for software.
In the penultimate grade of schooll (I was 16 then) I started working in the laboratory of the university, where I made a project for further admission.
I started by working at a lathe, which was 2...
I think the author of the topic, my answer will no longer be relevant. Wish I had seen this thread before.
I have a Colombo spindle with an ISO-30 taper of 7.5kW. Maximum revolutions 24,000 per...