Search:

Ger21, this is first 100 lign of code (harley davidson's logo)
You can download complet GCODE in attached file (previous message)

Thanks for your help

Merci Ger21

G90 G80 G40 M3
G92 X0 Y0...

Thanks Barker for you file, but your right it's Similar
The same problem .......

This is not normal ....

Cyril

This is the mach2 report:

Sat - 17:17:56 ---Program Startup
Sat - 17:17:56 ---Demo Mode 25Khz.
Sat - 17:18:04 ---interpreter: cutter radius compensation off

I've install the demo version,...

Thanks Barker to your reply !

Yes mach2 are registred (i've buy in ebay.com)
I've try to mach3 .......... no error, but always the problem........ :(

You can download my Harley Davidson's...

Hi,

I've made a GCODE buy this super software ==> Imagde To GCode
This GCODE is good and run in my CNC SIMULATOR software ! (it's a Harley Davisdon's LOGO)

But It's don't work in MACH2, i see...

Ok Alan thanks for your reply !

Well, if i understand: Pin 1 of my connector ==> in the ground (after c12 for exemple)

It's right ?

Thank you very much

Thanks for your reply Alan !

Thermal shutting ==> i'm not sure because, he's don't hot, and i 've a adequate heatsinking)

My power supply is a 33v in 12A

I've use 10KOhms for limitation (R2...

ok i see,

but you haven't other solution for me ?

I don't understand, it's run only 20 secondes, after, no action !

What is my problem ???? picstep ?, Interface ?, please help me :confused:

5V to the pin 1 (enable (brake)) is Necessities ?

:tired:

well,

1- 5v to pin 14 of the pic16f ==> OK
2- 5v to pin 14 of the lmd's ==> OK
3-Information in pin 11 & 10 of the lmd's ==> OK

But, the motor run only 15 secondes in ON position ! After it's...

hi,

I don't look that !

But whatdo you mean here ?:

2. Using the 4 axis interface, there needs to be jumpers added to power the Pic on the Picstep. (where ??)

3. On the opto isolated...

Hi every body.

I build 3x Picstep v4 from fromorbit and one 4 Axis PC interface from pminmo :cheers:

I have a big problem !!!
The motor don't work (vibration), i use stepper motor (astrosyn...

Thanks for your reply !

Now, please tell me what is the best stepper !?

- Vexta PH264 - E1.5
- Sanyo 103-770-6
- Vexta PH266M- E1.2B
- Sanyo 103-715-67

Let us imagine that every engine...

please reply !

I'm newbi and i don't know if i need 3 swith, 6 switch, .....
Please a small help for a small newbi :rolleyes:

Hi every body ;) how are you ?

I have one problem.... please tell me how many switch i need ...

2 for X (begin and end)
2 for Y (begin and end)
2 for Z (begin and end)

It's right no ???

pminmo Thanks, but this motor is good ? (power, speed, .... ?)

If yes, I take 3x this motor and picstep v4.0 + interface 3axisopto

:cool:

Bien le Bonjour de France mes amis !

OK thanks for your reply,

I find one motor, but i don't know if it's good or bad motor for my application.
Motor reference 57BYG060/04 bipolar 2A,2.6v /phase

Or have you a reference to be...

pminmo for the moment i don't have motor !

My CNC is very big (200 cm x 150 cm)
All in Aluminium, i seach the best motor and best controller for my applicatin !

I send a picture twomorrow !
...

Hi,

Please tell me what is the best controller for cnc with 3 axis ?
Thanks for your help

++