Hi All
I just had this error 622 c axis engagement come up the other morning. I've narrowed it down that it only does it when its cold. If i run the machine for a few hours on non c axis engagement...
Type: Posts; User: bearracecars
Hi All
I just had this error 622 c axis engagement come up the other morning. I've narrowed it down that it only does it when its cold. If i run the machine for a few hours on non c axis engagement...
Yes I found that out . What a bummer.
I am not to familiar with the sheet metal functions yet. So i would like some input on the proper way of doing it.
The file is a part that was drawn in an assembly. It is basically a flat base with...
The answer is yes. You will have to create the profiles for your specific application.
In Frame member selection, there isnt round tubing sizes for standard round tubing? (ie. 1.5" x .095, 1.75" x .120, etc.) I see all the metric sizes. Do i have to create those profiles? Or am i just...
I was wondering if anybody knows how to dissasemble a bilz style tap collet. i must have a chip behind the part that locks the tap in.
Thank you
bear
are you kidding me, you made a video! thats awesome. wow, with a video it makes it very easy to do.
do you have any suggestions for an online tutorial, video set or literature?
thank you so...
where i'm having it done they have a 6 axis cutter but they can't get good results on stainless past about 20 deg angle into the tube. besides need some place for the filler rod to go. so being that...
matt
you are correct. that is the front view. so if i understand, i would have to draw the part in mastercam in 3d. I've just been using 2d dxfs from autocad.
attached is the top view and the...
never mind! I figured it out. thank you so much for your help once again. couldn't have done it with out your help.
bear
perfect! just like that. ok i've been trying to back track through the design tree but i'm confused. i should mention that i am very very new at this. could you please explain how you would do this...
so i thought that i could just set the material heights to neg. numbers for each cut but that doesn't seem to work. any ideas on how to do this?
thanks
bear
hi guys
I need some help on this one. I drew some tube parts to get cut out with a laser, but on the tube ends where the notch is it has the o.d. profile and the i.d. profile because of the...
hey guys
I'm new to mastercam. right now i'm just playing with x3 demo version.
i have a piece of rectangle bar that i will be holding at a 13 deg. angle and will be cutting multiple steps.
My...
thanks diy
sorry but i'm a newbie at this. i just took my drawing extrude cut the .005 gap and used the edge as bend then flattened it. thank you so much for your help.
bear
Hi guys
What are the steps to flatten out this part into a sheet metal part. I need to print this out and wrap a tube for a cut pattern.
Thank you
bear
I totally agree. i've got a few jobs that require multiple bends at all different angles on a single piece of material. so setting up a library wouldn't be that hard. i've already got one for my...
hi there
was wondering if anybody has done a cnc conversion on a press brake using mach 3 or similar?
thanks
bear
hey guys
here is my next problem. I replaced my thrust bearings on my x and y so i need to readjust my backlash. I think that i have and idea how to do it but anything that you have learned from...
hey guys
thanks for your help! Al it was something you said in that last reply that got me thinking. the encoder looking for a marker is what did it. i figured it only has so many marks and if...
Sorry about that. Its has a yasnac I80M controller. which i've been told that it is similiar to a haas and someone else said similiar to a fanuc. i think its the fanuc style paulrp (thank you) sent...
Hey guys
Don't know if this is the right category. I just got a shizuoka b-5v410d mill. I had to pull the z servo off the machine to get it in the door and to regrease the thrust bearings. I had it...
sorry I know that this is an older post, but i was wondering how the haas post worked out. I just got a shizuoka mill with a i80m controller. can't afford master or surfcam yet so a friend is going...
Phoenixmetal
I was wondering is the post processor going to be the same as far as the i80m or is it going to machine specific with the i80m? Reason i am asking is because i just got a shizuoka...
hey mel white
do you have more info or a place to find info on your kits?
bear
switcher
is there a experation for your files on the file hoster? i was downloading some dxfs yesturday and starting with the fish splash they seemed to be random from there on if they were there or...
thanks bennet71
where do i save it?
bear
hi there
i have autocad 2005. how do i dimesion the circumference of a circle or the true length of an arc? i can get it if i use properties, but how do you dimension it on the drawing?
thanks...
thank you so much!
bear
this maybe over before it began. i had not yet saved a drawing that i was working on and the power went out. is there a temp file somewhere that it can be retireved from?
i know i know always save...