Search:

Will the board shown at https://smile.amazon.com/gp/product/B07H656NR3/ref=pe_27542520_570895010_em_1p_5_lm work?

I am looking for best plastic material for machining on CNC routers. I wish to make parts for model cars. I have 3D printer but a job like an engine block for 1/4th scale model cars can take 24 or...

My CNC router has 3 NEMA 34 Stepper Motors, 3 MondoStep 7.8 Bi-Polar Stepper Motor Drivers shown at...

I have a large 24VDC motor that I took from a small CNC engraver shown at Micro Center - Computers and Electronics. How can I connect this motor as a spindle to the CNC xPro board so that the board...

I would like to build CNC router/3D printer using T-slot extrusions. Working area should be at least 12" by 12". Any plans or kits?

I have Magnum Phoenix GS CNC Router.

The machine is shown at:...

I checked the web site that you referred me to and I found out that they have many different kinds of plastic sleeve bearings! Which ones? The old ones are white.

I have Magnum Phoenix CNC router that I got six years ago and replaced its electronics with new ones. Now, I found out that the machine needs new linear bearings. The old bearings are made of white...

I bought the machine from MicroCenter yesterday. I know that the machine comes in assembled or kit version and I was surprised to find out that I got the assembled version. It uses engraving bits...

I found out that MicroCenter has Linksprite CNC Engraving machine. I'm thinking of buying the machine after going to Linksprite's website at DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving...

How can I remove the top cover and rubber accordion-like parts from the machine so that I can lubricate the shafts? I tried to find the service manual on the internet.

I was given a New Herme/Gravograph IS400TM machine with controller, hand-held controller, an old computer running Windows 98 or NT, and software for the machine. I may be confused with the machine's...

I have three MondoStep 7.8 Bi-Polar Stepper Motor Drivers and Nema 34 round stepper motors with six wires coming out of them. How can I increase the torque of the motors?

I have Probotix PBX-RF RF Isolated CNC Breakout Board, Wrap9 USB SmoothStepper board, and Mach3 software. I'm having weird problems with my CNC router and I think that the boards may be going bad. I...

What is the best wood for signs using 1/16 inch bits? I'm making signs that have NYPD and FDNY badges on top of USA flags. I think that the best wood is poplar or maple. My woodworking teacher is a...

I think I have problem with my Magnum Phoenix GS CNC router with Probotix electronics. Five years ago, I replaced the electronics with those from Probotix. The machine has PBX-RF RF Isolated CNC...

Right now, my computer is running Windows 7 and Mach3 software. I have USB SmoothStepper and Probotix PBX-RF CNC controller. Will there be Windows 10 Driver for USB SmoothStepper? I'm afraid of...

I have a woodworking CNC router. Someone asked me if I can cut cork sheets on it and I told him that I was not sure. Is it possible for me to cut cork sheets on the CNC router? What if I glue the...

I have a PC running Windows XP, latest version of Mach3 software, latest version of SmoothStepper driver and plug-in, Probotix PBX-RF RF Isolated CNC Breakout Board, three MondoStep 7.8 Bi-Polar...

I have a Magnum Phoenix GS CNC router. I replaced its outdated electronics with PBX-RF RF Isolated CNC Breakout Board and three MondoStep 7.8A drivers. I use Mach3 software to control the machine....

I didn't know that "Apple Ply" is a brand name. I thought that "Apple" is wood from trees that grow apples.

I went to Lowe's store this afternoon. I found out that they have birch, lauan, and maple plywood in 1/4", 1/2", and 3/4" thickness. The maple plywood looks like baltic birch plywood with more plys...

How should I lubricate the leadscrews on my machine? I don't know if the nuts on the leadscews are metal or plastic or if the nuts are anti-backlash or not. The company that made the machine went out...

I know that carburetors have venturi(s) to increase air flow through the barrel of the carburetor, creating vacuum and causing gasoline to come out of nozzles. Will a venturi increase the suction...

What about poplar and basswood?

I got a sample pack from the company that makes Precision Board Plus. I'm not sure about buying Precision Board Plus. Is Maple good solid wood?

I would like to make 3D models of vehicles such as subway cars, cars, trucks, vans, etc. Which plywood is best? Is Baltic Birch plywood best?

More pictures of my machine

Here are the pictures of the CNC router that I upgraded to new electronics. The pictures were taken by my shop teacher.