Search:

Hi Fellow Chip Makers,

This is what happens when you leave the co-pilot alone with the machine.
They were doing a setting tool change when the tool changer completed the change but stopped at...

Hi All,

Been having a problem with our mill tool changer (the worst kind a intermittent one) the machine goes to tool change position, tool flicks down from carousel, arm turns picks up tools...

Hi Kiwi, I gave it a go and worked like a charm.
Here is another one for you with the tool change on our machine(a double collum type) the spindle goes to the tool changer (24 tool vertical...

Well I never knew that, thanks for the help I will give that ago when I get to work.
All the best for the season

Proud owner of a 8055i and I am up to Rev 4 on the post Bobcad supplied as passed by Fagor and I am having the "Jerking" problem myself how has it worked out with you, perhaps we can help each other...

With Bobcad you get a programe called Predator and this is where I can make a change or insert a line in a prog but as there are over 7000 lines of info per operation if I insert a line I will have...

Would that be at the start of every operation e.g after a tool change

Hi Fellow chip makers,

We are using a Fagor 8055i and Bobcad 25V now when we do a 3D model (looks like a jelly mould) and run simulation in Bob
it looks mighty fine but when we run it on the...

Kiwi just explain to CM the way you get the F value as I am away for awhile.

Go with Kiwi's info it worked for us.

Thank Kiwi,

That made the machine go thru the moves and NO error so I will try on the part later.

Jock

Thanks Kiwi,

We are trying to tap 3 off M10 x 1.5 hole using a Fagor 8055i control and BobcadV25 when we run the Prog it does the
C/Drill (Canned) then the Tap Drill (Canned ) but when it gets to the Tapping...

I am running Bobcad V25 and trying to ream a hole but it insists in putting a "Finishing cutter" in the program this seems to be a end mill of the same dia as the U/size drill used before the...

Greeting fellow Chip Makers,

I am a newbie at this CNC game and I am being told all sorts of horror stories in regards to computer alzheimer's (memory loss) due to a flat battery.
So what is the...