Search:

I believe the issue has been solved. I am using windows 7 with a parallel plug on mach 3. mach 3 only supports windows xp and vista via parallel. so I have ordered a us100 device that will go from...

I believe the issue has been solved. I am using windows 7 with a parallel plug on mach 3. mach 3 only supports windows xp and vista via parallel. so I have ordered a us100 device that will go from...

https://youtu.be/nvFNyi25ctw
made a new video covering every detail of my setup. can anyone spot the issue?

https://youtu.be/nvFNyi25ctw thorough video update on the issues I'm having.

yes they lock, let out a hum. but wont budge while jogging

Aplplied the epp settings rebooted the computer use the taig profile and still got nothing from the motors when I jogged them.

http://www.cnczone.com/forums/attachment.php?attachmentid=371426&stc=1

k, got it. applied EPP mode

ohh in the startup f12 menu. k let me check

I don't see an advanced setting for the LPT1 port?

http://www.cnczone.com/forums/attachment.php?attachmentid=371410&stc=1it crashed the system when I switched to the RAID Autodetect / AHCI

k, I changed the raid setting like you said and rebooted my computer.

what do I need to change them to? serial port #1 is set to auto.

Having issues with uploading pics on here. sorry. is that what you needed?

Manufactuer: [Dell,Inc.]
Model: [0C27VV] [A01]

k.will post in a few

BIOS Version =A15

I will do this right now. Give me a few minutes and I will post it

where can i find my motherboard info? i will send you the info.i am new at this so nothing makes much sense yet. thank you for helping so much!

I show that I have already defined them in the video

https://youtu.be/3Nj4oSA9DzI
If you watch one of the videos make sure its this one. I finally covered everything in one video. sorry for the delay, this one walks through my entire setup and...

https://youtu.be/G3_r8lfxgek here is my configuration on the com ports

does anyone know the settings for the ports and pins? or a way to find out?

http://www.cnczone.com/forums/attachment.php?attachmentid=371352&stc=1

okay i have found the same parallel cord you have depicted and have the driver also. now what do do?

(LPT1 Port?) I don't know what that is but I will google that right now and see if I can switch it. Give me just a few minutes. I appreciate your help greatly!

.

https://youtu.be/oWwnAoPtjM8 my setup

https://youtu.be/oWwnAoPtjM8 i made a short video of my issues on my channel. im hoping its something obvious. im new to this

.

im having the same issues, you ever get it figured out?