Using the G4U## delay between open and moving could work but you could also fixe the barfeeder parameter to allow more time.
Iemca parameters #9 & #10 are delays for "Open collet thrust delay",...
Type: Posts; User: cogsman1
Using the G4U## delay between open and moving could work but you could also fixe the barfeeder parameter to allow more time.
Iemca parameters #9 & #10 are delays for "Open collet thrust delay",...
P010060 sets 3 things
- first 2 digits is the amount of finish passes - 01
- second 2 digits is % of the lead or pullout exiting the thread- 00
00 = almost no angle at...
I have found that on some controls I need to use brackets around the variable number.
IF[[#100]EQ1]GOTO40
Try that to see.
There were multiple versions of the B12. You should state which generation you have and inch or metric. Which control?
Your spindle is still spinning and can't open the collet to eject.
460146
That is a programming error. Check the codes format.
tool radius - (tool radius x tan (angle ÷ 2) ) = Z axis comp.
Can't upload Operator manual. Too large.
Send me email at
[email protected]
Should be able to send it that way.
If you have already programmed the "L" series machines you won't have an issue with the M20.
$1 is what your used to just tool numbers are different. (T11 - T18 instead of T1 - T9)
$2 is the...
spindle cond check time exceed 1102 $1 === You are trying to close the collet while spinning too fast. The machine tried but it took too long = Alarm
axis error alarms === What axis'?
...
The code in parenthesis is "Man readable" and will NOT be seen during the running code.
The forward slash / is used to SKIP the line after the slash WHEN "Block Skip" is chosen.
G821- Machining mode change to use the three drill stations T21-T23 in the
$1 programming line. G821 will queue with lines $1-$2 then G821 makes
the Y1 axis follow the X2 axis so you...
CODE DESCRIPTION
G84-rigid tapping. Main Z1-S1 or sub Z2-S2
(MAIN SPL)
T1414
M3S1=500M8M28
G0Z.05
M92
G84 Z-.5 R.03 D1 F.05 S500 ,R1
Check your Plane select to be sure the radius you are cutting is using the proper axis'
MY MACHINE USES;
G17- Plane select X-Y
G18- Plane select X-Z
G19- Plane select Y-Z
Win-Cnc does NOT align the "G600" codes. It will check to see if you missed one and then show you where that is.
You can get the Citizen product "Alkart Wizard" which will do both and cost the...
The machine is trying to protect itself with collision areas. You will need the "M88" to allow you to get close to any tool block. Just making you be careful and save money from accidents. **Also,...
You are in "Cont" mode I assume? Thats the only way it would ignore the M2.
You MUST add the line M77 to "Phase" the two spindles.
The G114,1 H1D-2 MATCHES the spindle RPMs and direction.
Adding the R0 (or R ##)
will correct the ZERO position while matching the RPMs ...
Here you go!
351076
You do want to use the "Mean" to calculate the helix angle to set the head to. I always use an indicator to set it perfectly. FYI, any amount of error you have at setting the angle will effect not...
6C Main circuit error
The main circuit capacitor in the power supply could not be charged correctly
Replace unit
The SPEED you are going when you try to open the collet ALONG with how tight the collet is adjusted could make it take longer for the OPENING to complete. IF, the Z1 axis moves before the collet has...
Did you get this done? What generation of L20? 5M7 ???
You need to choose the Tool Pattern that has the description of 5T +5R
If you are using a bore bar, the normal tool is set below center. That will leave a "nub" at the center. There are "Turning Bars" made for this type of cutting. You can also get adjustable holders...
G0 X100Z100
They are the SAME thing! Just a different term for it. I believe the "CORE" is the CENTER. Jinglish
O10080 (program name)
#1=45 (local value)
#2=0(index position counter(************************)
G54G90G40G80G20 (workzone,ABS,rad comp cancel,can cycle cancel,inch)
M06T3 (call tool 3)
...
M3S1=800
M23S2=800
G114.1H1D-2R0 (or G814 R0) (SYNC RPM)
M77 (PHASE MATCHING)