We have a VF11 and we are trying to clean up the hard drive.
We were able to delete all the extra files but 2.
One is named Y
The other is Copy of Cf11
On extensions on either.
When we try to...
Type: Posts; User: Ron22
We have a VF11 and we are trying to clean up the hard drive.
We were able to delete all the extra files but 2.
One is named Y
The other is Copy of Cf11
On extensions on either.
When we try to...
I agree I prefer the USB also but it is either put USB on 10 machines or get the floppy to work on 1 machine.
Like I said they want them all the same and do not want to spend to much $$$.
I have VF11 with a USB, Floppy and Harddrive.
The floppy does not work. We are currently using USB but they want the floppy. The reason for wanting the floppy is all the other Haas only have floppy...
Not sure the GBS-8219 from jammaboards is worth it. $259.95 seems like a lot cant you still buy monitors from Haas?
I know this is an old post but just wondering if you go it working.
If not let me know maybe I can help
After looking at it again do not hook up
4- W (POS SIG A)
5- U- (POS SIG NOT C)
6- U (POS SIG C)
14- W- (POS SIG NOT A)
15- V (POS SIG NOT B)
16- V- (POS SIG B)
At first I thought they were...
Here is what I would try.
motor encoder pins --------------------GEOBRICK ENCODER PINS
1- B (ENC2)----------------------------2- CHBn+
2- B- (not ENC2)----------------------10- CHBn-
3- Z...
For an extra output map one of the unsed amp enable on the ACC24E2A to a M varible and use that.
That is realy you only option for outputs with what you have.
You could buy a I/O card on Ebay...
Rigid tapping on mills work the same way. I have never personal done rigid tapping on any machine.
I love that answer from Delta Tau. ( I have heard it before too)
I have never done a lathe. I have done multible Mill's and Waterjets with 2.36.
Just to warn you if you call Delta Tau about...
Converting motor setting from PMAC to Turbo2 (what is inside a UMAC) is not that hard. They did add more I varibles in the Turbo. There are some differacne becuase it is Turbo 2 (I assume your first...
Is there a reason you are switching to a Turbo? Or is it just because you want the UMAC?
A turbo is more processing power than you need. I do like the UMAC package.
Tim,
I have converted a few AB 9 series to Delta Tau NC.
There are alot of other NC controlers out there that could be used.
I would recamend you have an outside contractor complete...
John,
Doesnt Boeing have the manuals for the software? Is this the old Dos based Cimrock software?
PaR Systems is the company making and supporting the machines now.
www.par.com
Looks good.
I know this is an old thread but Steve brought it back.
So any new status.
Verell,
Sorry I have been busy and not been able to look here lately.
I sent you a PM.
Any progress?
Ron
Personaly I would get the Delta Tau working. But then I know Delta Tau and do not know EMC2
Answer to you question. 99% chance you Servo drives are +/-10V input either torque or velocity mode....
I forgot you are using Win3.1. Im kind of at a lose I think something is wrong with the DPRAM. You could call Delta Tau and see if they can help. Just thell them you are using PEwin and get the DPRAM...
Just thought of something else run Regedit (be carefull you can screw things up)
Look for the following
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pmac\Device0]
See if there is...
The issue I was thinking about with the DPRAM cards was with older cards working with newer PMAC's. Your DPRAM card is newer so that should not be an issue.
Try setting the DPRAM to the defaut of...
What PMAC card are you using? What DPRAM card?
Partnumber and serial number.
It sounds like you issue is the DPRAM communications.
There is an issue with older DPRAM card and newer PMAC card. I...
Just so I understand.
You have a working system with a PMAC Lite ISA and a ACC14D in a working machine. You just want to update to newer.
The new system is a PMAC Lite PCI and a ACC14P.
You...
M0->Y:$FFD0,24
M1->Y:$FFD1,24
Are pointing to the ACC14P card. So it looks like you are suing the 14P card for feedback. Is that correct?
Try with Download the configuration of the ISA cand...
How are you trying to set up the DPRAM?
Do you hava program called Motionexe.exe? Is that what you are using? In motionexe.exe there is an option for setting up the DPRAM address. Let me know if...
Sounds like you ahead of me already.
The file might not have a modified time stamp if it just read in.
You could just looking at files with not pad and see if anything looks like a congif file.
I...
Sounds like the MICRO2 is downloading the config file every time it starts. I have seen alot of programers do this. Search the hard drive and make sure thet is not another MPATH2.DAT floating around...
Try this.
Then open PEWin
In PEWin oepn a postion window.
Turn one of the motors by hand. Is it counting?
Try this for all the motors.
If they are not counting try typing
I100=1
I200=1...
Im a little late to this thread. I do work installing Delta Tau PMAC's on machines and repairing PMAC controlled machines.
If you want send me the file you are tring to down load and I can down load...
switcher,
I have that program but like I said I need it in VB6 or older.
I tried to just use the DLL file but it will not work with VB6. I tried to recompile it so it should but I could not get it...