there is no outline at top level, they all projected to surface already, but rhinocam act like they are at top level.
Type: Posts; User: delid
there is no outline at top level, they all projected to surface already, but rhinocam act like they are at top level.
new screenshots added. 1st one is what i am talking about.
2nd one is to show that non-planar curves give right result for planar surfaces, or in other words, it gives same result with planar...
is there any way to use vcarve method on non-flat surfaces with rhinocam?
here is an example of what i am trying to do(at 7:34):
https://youtu.be/rX6GO4Z3LWg?t=454 at 7:34
and here is what...
i don't see a reason for an encoder or servo instead of spindle, why you think that?
and do you think it's not 3 axis?
https://youtu.be/-di-NMFy5iI
as in video, it's 3 axis rotary milling (spindle) machine, 1 rotary and 2 linear axis with a spindle. i couldn't see that option in rhinocam, there is 4 axis or 3 axis...
it's 3 axis, have a chinese control card, link of card is here RZNC-0501,RICHNC,RichAuto-Beijing Richnc Technology Co.,LTD - RZNC-0501,RICHNC,RichAuto-Beijing Richnc Technology Co.,LTD
some local...
i will keep driver loaded, just gonna cut the signal from controller so it wont move.
even if i leave it unloaded, i ma not sure if there is enough cutting force to move it.
hi everyone,
i have a 3 axis machine and want to add a lathe/rotation axis, too but i can't add it as 4th axis because of the control card so i am thinking i can add it instead of Y axis.
so...
hi, i have this control board running(picture attached), i tried to wire another stepper to c axis and give it some gcode with 4th axis generated with rhinocam.
now the new stepper not act like a...
it might be too late for that. i didn't change the binary (the arrows i mean) but i changed the number that the steps for rpm (8 in our example). i tried 2 and 16 and some between. but when i set it...
it's actually a turkish company's cnc but parts are imported from china. dsp is RZNC 0501
my spindle is 16000 rpm max
https://photos.app.goo.gl/M5ANKqZbJvRRtLus9
and spindle driver is this...
i read that dsp controllers can not read S values. but is there another way to control rpm with gcode?
i can speed up and speed down the rpm from controller, but it doesn't give any rpm value,...