Sounds like harmonic vibration, how is it supported?
Type: Posts; User: sdopp
Sounds like harmonic vibration, how is it supported?
I am trying to find a foam router with a z axes of 20" inches?
I've been tinkering with using some large servos but all of the plug in boards are for lower voltages. The servos I have run at 190 vdc, I'm not a chip brain, actually I'm about 2/3s of being out of...
Russell
I have silently watched your build, great job and perseverance. What I need to know is do you ever sleep, and how do you keep the mrs. happy?
Mike
I've taken the time today to read thru your entire thread. You desirve the five star ratting. Two questions? I work at a Technical College on the other side of your pond, with my salary...
It's always interesting to be on both sides of the fence. When I had my business I always had a meeting with my employees, once a month, every other month depending on business. I would discuss...
In the process of making a wax ring for jewlery the fourth axes is a wonderful short cut to complex shapes.
To rotate about one of the other axies. Say you wanted to machine a full 3d model of someones head. The block would be placed on the 4th axies and rotate while the z axes would move up and down for...
Keep on goin i"m a liken this tread already
If scored glass on a small cnc with a diamond tip burr, didn't work very well when I went to break it so I gave up.
Ah at last corndog67 the new breed of machining (from and old fart)
I agree with philbur, If your doing those parts on a manual machine, do a cnc retrofit and keep on truckin.
Good Luck I Learned On A Fadal And Then Added A Haas. Seems Like You Usually Like Your First Learning Machine The Best. Not The Case, I Think Haas Control Is Alot More User Friendly ( My Opinion)...
Haas X 24"mass = Crash
You can always start out with the calculation, but there is nothing better than to run, see, hear, and smell the sound of melting metal.
Put the hammer away cnc is here
I can whip up some real nice looking green peace stickers (Cheap @ .10 Per ton.
NC CAMS
I found the same hack job on one of our eztraks can't believe BP stooped that low.
58 too lazy to get my glasses out to hit the plus key
What about us old farts the did it manually and then had to switch to that computer thing?????
And for my two cents worth......The school that I worked at owned both and they have treated us well. Seems like is kind a like a Ford VS Chevy Question.
Put the Hammer away CNC is here
vga monitor works fine. we just use the smallest one we could find (cheaper the beater) now you can program in living color, red white and blue
Russell
I have enjoyed reading thru your post on your adventure thus far. I was in Australia some forty years ago. I'm glad to see you guys down under are still holding up the rest of us. I miss...
Great replies, I'm hoping to finish building my router this summer I would like some of you guys to post videos much appreciated
great pics, more when you can please
Its heavy only when you hit the ground!!!!!!!!!!!!!
Put the hammer away
CNC is here!!!
If you can't find on go to Lowes
Spend the big bucks and get the best?
Mastercam
Mazaholic
Amen To That!!!!!!!!!!!
I taught machining for years, had one student that reached behind a turning half inch end mill to get the next tool. Said he didn't even feel it take his finger off. He was lucking it didn't take...