Search:

I have also done a new flex test to the rail guide and base plate


http://youtu.be/DhEtfrY0kfI

I would like to know your opinion and that of other experts to understand more about cnc machines...

I'm sure the bracket is cast iron, but I'm going to use a magnet to check.

Regarding the carriages, I have recorded a new video where you can see the measurements and their maximum route:

...

Andreiir I appreciate your reply, if my machine has linear guides and I was thinking maybe I would have to tighten a screw, but I have not because I consider myself very new.

I've also been...

I have had this problem since I got the machine and I would like to know what is the solution to this.
Please watch the video, thanks


...

Hello all, I want to give angle of departure of 14 degrees to the letters, I want to know how you can do? thanks you

You can see this video? steps are set to 0.5mm and 0.1mm,

https://youtu.be/IYATalTP9Tk
I would ask if you help me step by step, you can see the options in the video2
...

I thank you for your answer, the problem I do not know how to do you can tell me how to be configured?

Hello friends, tell them I have a cnc router with DSP control and has emerged me a doubt and is steps from the XYZ axes, the least I could do go manually (by pressing the buttons on the DSP) is...

I reinstalled everything again including windows, tomorrow I'll have to test it with my cnc router, greetings.

I am using SolidCAM two months ago, but a week ago I created paths are wrong, the machine crashes, do not understand why that happens if there was no problem before, I have have made no changes to...

Hi, I have a cnc router, I like to use the SolidCAM but the postprocessor that I have is flawed and sometimes the machine crashes, I wonder if someone has a postprocessor for Chinese cnc router with...

Hello everyone, I have a query the dsp controller has only 0.5mm and 0.1mm steps at a minimum? or is there any option to advance to 0.1mm by 0.01mm step

Thanks.

Luis

Hi I am a user of this machine SHG0609, I need to change the axi Y for i need help, I need to know what the exact model and spare part necessary to make the change.
I hope your answers, thank you....

Hola que tal? estoy buscando el postprocesador y solo encuentro el archivo FANUC.GPP pero me falta el FANUC.PRP y FANUC.vmid , te pido un favor serias tan amable de poder compartir estos archivos??...

Hello Fanny, I have a question the system 21, so that type of machine is suitable?, thanks.

Thank you very much for sharing this file :cheers:

I've looked but not found in the picture looks, my version is 2014, please can you share :)

Hello everyone, I have a new problem emerged, I tried to make the paths by selecting the generic post processor fanuc.

I have an error this file is missing gMill_Generic_Fanuc_X_4x_Eval.GPP(check...

thanks you, I've got a video on your feedback https://www.youtube.com/watch?v=g0Rt-072Hr0

Now I have to find that post processor is compatible with my Chinese machine:drowning:

Arikaa, I mean speed of the spindle is 2.2kw to 24000rpm , I have to mention that I am a novice in SolidCAM, so I need help

Hello everyone, I'm new in SolidCAM and have a question and safe for you is easy, I want to use an engraving tool 0.1mm and selecting a speed of 20000rpm I get this error, as I can fix this?
...

Thank you very much for your reply, although I have no machine but you need to know whether the SolidCAM software is fully compatible with Syntec 20AM.

I think this is the most appropriate control...

Hello,
a question SolidCAM can use and create the g-code for syntec 6MA?

thanks Lee, please check you inbox.

AORD thanks for your answer, I am a newbie in artcam:D

I use Artcam, they can tell me postprocessor be used to syntec? please!

I've tried but I can not fix it, it's like artcam want to create a circle from straight lines, please help

con artcam no se si se puieda utilizar el auto tool

Now I have a question for experts:
on the side of this circle is seen as sawtooth do not understand why, please can you help me?

278860

sorry for my very bad English, you have reason to send to China.

They have no experience installing this control system, so they need the manuals.

My concern is to know whether the machine will...