Search:

Carvewright uses a flex shaft. So, it can be done. CarveWright.com - 3D Carving CNC Router Systems

jgro

http://www.cnczone.com/forums/downloads.php?do=file&id=5

jgro

Is there a relay for the spindle so that the gcode turns on the spindle with a M03 command? I have LinuxCNC on my machine and it does the same thing, I can have the router on and when LinuxCNC turns...

Check out here: http://www.cnczone.com/forums/diy-cnc-router-table-machines/192328-cnc-cad-software-posts.html

jgro

Like this? КАТАЛОГ БЕСПЛАТНЫХ 3D МОДЕЛЕЙ ДЛЯ ЧПУ В STL ФОРМАТЕ

jgro

If you're interested, I built a Gingery lathe also. You can see it documented here: Jgro's Shop Pages: Gingery Lathe . My inspiration came from Lionel's build here: Building my Gingery style lathe...

Look here: http://www.cnczone.com/forums/downloads.php?do=cat&id=3

My 4th machine had MDF bearings riding on gas pipe that was fully supported using aluminum channel. The machine worked good. I outgrew it. ...

The DXF files are located here: http://www.cnczone.com/forums/downloads.php?do=cat&id=3 Good luck!

jgro

Try this: Untitled Page

jgro

Look here: [Plugin] 2.5D CAM Plugin 20121202 ? SketchUcation Community Forums

jgro

The holes that are dimensioned on dtl101 are for the stepper motor, which have a different spacing than the rod support blocks. All of the holes for the gas pipe support are the same. You can use...

Have you looked here? CNCGUNSMITHING - www.cncguns.com - Home of the AR45

jgro

I got mine from SDP-SI Precision Mechanical Components Timing Belts Pulleys Spur Gears Couplings Bearings Sprockets Retaining Rings Brakes Helical Gears Clutches Universal Joints

jgro

You can use images of mine as well, even though I did deviate from your design ;)
http://www.cnczone.com/forums/momus_design_cnc_plans/154795-momustein.html
jgro

Is the model in a group? It needs to be grouped in order for the plugin to work.
Try the attached model and see if it works and we'll go from there.

jgro

Thanks. i've got some info on my blog: Jgro's Shop Pages

jgro

Thanks guys. emptystr, I'm still working out bugs, mainly with EMC (LinuxCNC), so I haven't even tried machining aluminum ...yet. Hopefully soon.

jgro

I made a plugin for doing 2.5D cutter paths in Sketchup if anyones interested: http://www.cnczone.com/forums/general_cam_discussion/154818-2_5d_plugin_sketchup.html

jgro

I fixed some bugs that I found while testing tonight. The latest file (v02) is available at the link in the first post.

jgro

Hi all. I've been working on a plugin that will create gcode for my CNC router. This plug-in

will take your 3D model and create 2.5D toolpaths for use on your CNC. Just download the Ruby
...

Finally, the enclosure. The door was made from pine boards with a plexiglass window.

http://i1094.photobucket.com/albums/i450/jgroesch/DCP_2559.jpg

Aview through the window. I attached a...

I had some IGUS cable guides lying around, so I decided to use them on this machine.

http://i1094.photobucket.com/albums/i450/jgroesch/DCP_2552.jpg
...

The Y Axis motor mount was an old motor mount I had created for a previous machine. I just had to add some holes to it and add some tapped holes to the angle iron that is supporting the ways.
...

I decided to use an existing Z Axis assembly from a previous machine. I upgraded it from a 1/2-10 Acme thread to a 1/2-8 2 start Acme thread.
...

Here are the foam patterns and castings for some of the carriage parts and the linear bearings that will be used on the gantry. The design for the linear bearings is the same design as what Fine...

I ran into a design problem after getting the carriages done. I assembled the two carriages to the gantry tube and placed the assembly on the base. Something didn't look right. I took a...

Hi all. I bought the plans for a Momus machine from Ebay, mostly because it can cut aluminum. I started modeling up the parts and decided that instead of buying all of the material, I would cast...

Roton Products, Inc. Quality Lead Screws and Nuts for Power Transmission

jgro

Have a look at what can be done with Sketchup: View topic - Most impressive SketchUp modelling • SketchUcation Community Forums These images and models changed my perspective on this software....